KRD17 Pneumatic Bidirectional Vertical Shock Test System
KRD17 series pneumatic bidirectional vertical shock test system is the new designed and developed for some large specimens that cannot or are not easy to turn over, especially for battery testing. It can complete vertical upward and downward shock tests.
l Windows-based stable control system, full-automatic remote-control interface
l Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free.
l Bidirectional vertical shock mechanism, to complete the upward and downward shock and bump tests.
l Automatic control of lifting height with high accuracy and good repeatability
l Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter
l Built-in double-brake system, safe and reliable.
l IPS-2000 shock control and measurement system can performdifferent shock waveforms.
l Optional foundation free:Air springs and dampers are used to reduce vibration.
Technical Specifications
Model Parameters |
KRD17-50 |
KRD17-100 |
KRD17-200 |
KRD17-500 |
KRD17-800 |
KRD17-1000 |
KRD17-2000 |
|
Rated Load (kg) |
50 |
100 |
200 |
500 |
800 |
1000 |
2000 |
|
Table size (mm) |
500×500 |
600×600 |
800×800 |
1000×1000 |
1200×1200 |
1500×1500 |
2000×2000 |
|
Shock Direction |
Downward |
|||||||
Peak Acc. (G) |
Half-Sine |
10-750 |
10-600 |
10-450 |
10-300 |
10-250 |
10-200 |
10-150 |
Post-Peak Sawtooth |
10-200 |
10-200 |
10-100 |
10-100 |
10-100 |
10-100 |
10-100 |
|
Trapezoid |
15-200 |
15-200 |
15-100 |
15-100 |
15-60 |
15-60 |
15-50 |
|
Pulse Duration (ms) |
Half-Sine |
2-60 |
4-60 |
5-60 |
6-60 |
|||
Post-Peak Sawtooth |
3~18 |
6~18 |
||||||
Trapezoid |
3~18 |
3~18 |
6~18 |
|||||
Shock Direction |
Upward |
|||||||
Shock Wave |
Half Sine Wave |
|||||||
Shock Peak Acceleration (G) |
15-350 |
15-300 |
15-200 |
15-150 |
15-100 |
15-100 |
15-75 |
|
Shock Pulse Duration(ms) |
4-60 |
6-60 |
||||||
Overall Dimension (mm) |
1250×1250×1600 |
1250×1250×1600 |
1300×1300×1700 |
1350×1350×1750 |
1550×1550×1750 |
1650×1650×1850 |
2000×2000×1900 |
|
Weight (kg) |
3000 |
3200 |
3400 |
4000 |
5000 |
6000 |
8000 |
|
Power |
AC220V 土10%,50Hz |
|||||||
Air Source |
≤1MPa |
|||||||
Installation Conditions |
No special foundation is required for installation, but a smooth cement floor is required. 800 ~ 1000mm working distance are reserved around the equipment |
|||||||
Working Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense |
|||||||
Standards |
MIL-STD-810F IEC68-2-27 |
Send product request
Other supplier products
KRD60 3-DOF Simulation Table | KRD60 Series 3 DOF simulation table simulates various mechanical, electrical, and electronic products installed on ships, seaplanes, and other equi... | |
KRD100 Incline Impact Tester | KRD100 series incline impact tester simulates the ability of product packaging to resist shock damage in the actual environment, such as handling, ... | |
KRD20 Pneumatic Bump Test Machine | The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on elect... | |
Constant Acceleration Tester (Arm Type) | KRD31 series constant acceleration tester are used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-... | |
Constant Acceleration Tester (Box Type) | KRD30 series constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are sub... |
Same products
BS EN 12600 Two Tyres Impactor | Seller: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... | |
Hast Pct High-Low Temperature Test Chamber with Pressure | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali... | |
Programmable Hast Accelerated Aging Tester for Industry | Seller: AI SI LI (China) Test Equipment Co., Ltd. | HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ... | |
CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard | Seller: AI SI LI (China) Test Equipment Co., Ltd. | CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th... | |
Package Large Scale Simulation Transportation Vibration Tester | Seller: AI SI LI (China) Test Equipment Co., Ltd. | This machine is used to simulation testing damage between transport for various package stuff, PC... |