Small Drop Test Equipment
KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile s, walkie-talkies, electronic dictionaries, CD / MD / MP3 and so on， applicable standards JISC 0044 and IEC 60068-2-32. Through standard tests on electronic products (surface drop, corner drop, edge drop, etc.) and collecting data, it simulates the vertical drop impact of electronic products during transportation and handling. It provides a basis for the design of the product's buffer and vibration damping and the selection of structural materials.
It can be dropped naked or dropped with packaging to evaluate the impact resistance or the damage caused by the fall of the product during transportation. It is an indispensable test method to improve the product's quality. It is applicable for electronic product research, development, quality control, manufacturing and other links.
Features:
l Upper and lower displacement limit to guarantee safe.
l The lifting height can be adjusted arbitrarily to meet the different requirements.
l It can clamp and drop the test sample at any angle
l Just place the machine on a flat marble or concrete floor, no special foundation needed
l Remote control can be realized to ensure the safety of operators. (custom function)
Technical Specifications:
|
Model Parameters |
Zero-distance drop tester |
Double lift zero-distance drop tester |
Small drop tester |
||||||
|
KRD40－100 |
KRD40－200 |
KRD40－300 |
KRD42－500 |
KRD42－800 |
KRD42－1000 |
KRD42－2000 |
KRD41-100 |
KRD41-200 |
|
|
(kg) |
100 |
200 |
300 |
500 |
800 |
1000 |
2000 |
100 |
200 |
|
Drop Height (mm) |
0～1500 |
0～1200 |
0～1000 |
0～1000 |
0-800 |
300-2000 |
|||
(mm) |
1000×1000×1000 |
1200×1200×1200 |
1300×1300×1300 |
1400×1400×1400 |
1500×1500×1500 |
1600×1600×1600 |
1800×1800×1800 |
1000×1000×1000 |
1200×1200×1200 |
|
Position Accuracy |
±2mm |
||||||||
|
Drop Zone Size （W*D/mm） |
1200×1200 |
1400×1400 |
1500×1500 |
2400×1600 |
2600×1700 |
2800×1800 |
3200×2000 |
1200×1200 |
1400×1400 |
|
Test Mode |
Face, Edge and Angle |
||||||||
|
Power |
AC 380V ±10％ 50Hz |
||||||||
|
Working Environment |
Temperature range 0～40℃，humidity≤80% (no condense) |
||||||||
|
Standards |
ISO2248-1985 (E) IEC68-2-27 ISTA |
||||||||
Send product request
Other supplier products
 |
KRD70 Hydraulic Vibration Shaker | KRD70 series hydraulic vibration shaker converts the energy of high-pressure liquid into the power of the reciprocating motion of the cylinder thro... |
 |
KRD60 3-DOF Simulation Table | KRD60 Series 3 DOF simulation table simulates various mechanical, electrical, and electronic products installed on ships, seaplanes, and other equi... |
 |
Transportation Simulation Test Machine | KRD50 series transportation simulation test system is to simulate the actual road conditions such as shocks and vibrations during the transportatio... |
 |
KRD20 Pneumatic Bump Test Machine | The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on elect... |
 |
KRD100 Incline Impact Tester | KRD100 series incline impact tester simulates the ability of product packaging to resist shock damage in the actual environment, such as handling, ... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
