Walk In Salt Spray Chamber (Temperature Humidity Combine Salt Spray)
Walking in a salt spray chamber is different from a basic salt spray laboratory. Walking in a salt spray chamber exposes the samples to a series of different environments, with repeated cycles including temperature, humidity, salt spray, and drying.
Accelerated corrosion testing methods include ASTMB117, ASTMBG85, ISO9227, EC60068-2-52, EC61701, ISO7253, etc. News website
Test subjects: Battery packs and systems.
Refer to Section 5.5.2 of GB/T4, Test Method. The test was conducted according to the test conditions specified in GB/T243.17.
The salt solution is composed of sodium chloride (chemical purity and analytical purity) and distilled or deionized water, with a concentration of (5+1)% (mass fraction).
The measured pH value is between 6.5 and 7.2℃.
The test subjects were placed in the salt spray chamber for a cycling test. Each cycling test lasted for 24 hours. The salt solution was sprayed onto the test subjects, and it was maintained at a temperature of (35+2)℃ for 8 hours, followed by a 16-hour period. Between the fourth and fifth hours of one cycle, the test requirements in GB/T28046.1-2011 should be met, with the test mode set as 3.2.If you need more models about our test equipment, please reference our ： chamber-testing（Click）com
A total of 6 cycles were tested.
When installing test items in passengers, luggage, or cargo compartments, the salt spray chamber is not required.
Features and Structure
Can be extended to a temperature range of -40°C to +80°C
Due to the glass fiber reinforced plastic (GRP), the internal surface has impact resistance and scratch resistance.
Saddle top with an inclination of at least 30 degrees
Indirect temperature control for corrosion resistance
Humidity measurement system for temperature and humidity control
Heating elements control the laboratory temperature with over-temperature protection
Ventilation device for flushing the laboratory with fresh air
Send product request
Other supplier products
 |
Three Comprehensive Vibration Test Chamber | DescriptionThree comprehensive vibration test chamber is an instrument and equipment that simulates high temperature, low temperature, high and low... |
 |
Satellite components Walk-In Altitude Test Chamber | Designed to simulate and evaluate the reliability of electrical/electronic products, instruments, and industrial equipment under combined environme... |
|
|
Walk In Salt Spray Chamber (Temperature Humidity Combine Salt Spray) | Walking in a salt spray chamber is different from a basic salt spray laboratory. Walking in a salt spray chamber exposes the samples to a series of... |
 |
Metal material simulation humidity chamber | The humidity test chamber, often referred to as an environmental test chamber or a constant temperature and humidity chamber, is a device that can ... |
 |
Environmental Test Chambers manufacturers Climatic Test Chambers | temperature test chambers temperature-adjusting and conditioned air duct is designed as a double air duct, which is connected to the studio but iso... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
