Surgical Mask Flame Retardant Tester
Flame-retardant tester for surgical mask, In case of the mask is accidentally exposed to flame, its flame-retardant performance is directly related to the safety of medical personnel. The flame-retardancy of mask is one of the important physical indicators for measuring the quality of surgical masks.
Standards:
GB 19083-2010 Technical Requirements for Medical Protective Masks, 5.5 Performances of Synthetic Blood Penetration and Barrier
YY 0469-2011 Technical Requirements for Medical Surgical Masks, Blood Penetration Test Device
GB 2626-2006 Respiratory protective equipment,Filtered particulate respirator,Flammability
BS EN136-1998 Respiratory protection equipment Full Face Mask Requirements test sign
Major Features
Touch-tone + Counting module control
The digital display counter can preset the 1-99999s time test and automatically stops after the test is completed.
Emulational human head model
The mask clamp is a metal human head model that can fully simulate the actual use of the mask.
High degree of equipment automation
The instrument automatically records the burning time and flame-retardant time with digital display, and equipped with flame temperature measuring probe, flame temperature display, with characteristic of automatic ignition and adjustable flame height.
Application:
flame-retardant tester for surgical mask , It is mainly used to test the burning performance of surgical masks after contact with flame at a certain line speed, which is a special test instrument for flame-retardant performance of surgical masks.
It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.
Technical Parameters
|
Test mode: automatic |
Burner timing:0~9999.9₮ |
|
Linear velocity of head model automatic movement: (60±5) mm/s |
Distance between the top of the burner and the lowest point of the mask: (20±2) mm, The flame is at a height of (20±2) mm from the top of the burner |
|
Flame height:40±4mm |
Temperature: (800 ±50) C |
|
Temperature sensor: thermocouple detection |
Weight:65k |
|
Burner height adjustment range:30mm |
Power supply:220V 5Hz |
|
Wall thickness of metal head model: 2~3mm |
Physical dimension:810mm* 510 mm* 870 mmBurner timing:0~9999.9₮ |
|
flame resistant and resistance to burning |
Send product request
Other supplier products
 |
Dry fallen wadding tester G275 | G275 Dry fallen wadding tester, The tester is used to evaluate the fallen wadding test of non-woven fabrics under dry conditions, and is mainly app... |
 |
Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
 |
Fabric horizontal burning tester | Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of p... |
 |
45 Degree Automatic Flammability Tester | 45 Degree Automatic Flammability Testertest instrument is used to detect the flame resistance of the blanket fabric and the flame spread performanc... |
 |
Carpet Abrasion Resistance Tester | Standard ASTM D4157(Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)) ISO 12947-2(Textiles - Deter... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
