.

Sliding bearing PV friction testing machine

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standard

This machine is mainly applicable to GB 7948-1987 plastic bearing limit PV test method, JB/T 7381-2010 powder metallurgy oil bearing PV value determination method and other standards, used for the determination of plastic-based, iron-based, and other substrate powder metallurgy oil bearings and other sliding bearings limit performance.

Working conditions

(1)The tester works normally under the following conditions:

(2)Within the range of room temperature 10℃~35℃.

(3) In an environment where the relative humidity is not greater than 80%.

(4) no vibration around, no corrosive media and no strong electromagnetic interference in the environment;.

(5) The fluctuation range of power supply voltage should not exceed ±10% of the rated voltage, and the fluctuation of frequency should not exceed 2% of the rated frequency; and

(6) Correctly installed on a firm foundation with a levelness of 0.2/1000.

Main technical indexes

1、Test force (radial) loading range: 0-15000N.

2. force value accuracy error: ≤ ± 1%.

3. spindle speed: 0-2000r/min, stepless speed regulation.

4、Maximum speed error:±2r/min.

5、Measuring range of friction torque:0-50Nm.

6、Relative error of torque display value:≤±2%.

7、Temperature measurement range:room temperature-300℃; and

8. spindle taper: 1:7; friction sub-diameter: 35mm; standard specimen size: 39mm (outer diameter) * 35mm inner diameter * 35mm length

9. the test time control range: 0-999999S arbitrary settings.

10、Radial runout of spindle: ≤±0.01mm.

11、Test cycle control range: 1-999999r arbitrary setting;; and

12. control conditions: fixed speed variable load, set the test force, test time (or number of revolutions), test speed, loading interval time, loading gradient and other conditions, the test machine automatically control set the time, friction coefficient, friction temperature and other conditions of the shutdown, the automatic shutdown. The test process real-time display of the test force, friction torque, friction coefficient, number of revolutions, temperature, time and other parameters Automatic calculation of the test PV value, the amount of wear and other results of the data, and the output of the test report.

13. friction vice (steel bushing): 45 # steel quenched and tempered, hardness HRC40-45. or customized according to customer requirements.

14. the whole machine power: about 8.5KW.

15、Weight of main machine: about 800KG.

16、Main machine size: about 1200*600*1000;.


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

High-precision rapid thermal conductivity tester for geotechnical materials
High-precision rapid thermal conductivity tester for geotechnical materials Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This testeris designed for thermal characterization of geotechnical materials,...
Voltage Drop Tester for Automotive Wire Connectors
Voltage Drop Tester for Automotive Wire Connectors Whats/App: +86 156 1874 6768 Web: standard-groups.com The Voltage Drop Tester for Automotive Wire Connectors is designed to measure the voltage d...
Bus seat tester for safety and durability testing
Bus seat tester for safety and durability testing Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Test Standards NHTSA S5.1.3 – Seat Structural Strength Testing NHTSA S5....
Helmet Strap Tensile Tester
Helmet Strap Tensile Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Purpose Apply a certain initial load to the helmet strap system for a certain period of ti...
Deval abrasion testing machine
Deval abrasion testing machine Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion ra...
All supplier products

Same products

Custom Stainless Components for OEM Applications
Custom Stainless Components for OEM Applications Seller: Yongjia County Yaokang Technology Co., Ltd. Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Seller: Kelilong Electron Co.,Ltd Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Seller: Standard International Group (HK) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...