.

Fiber Crimp Elasticity meter

Product Introduction:

YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber.

Crimp elasticity, crimp recovery rate index determination, natural fiber and chemical fiber crimp

Special testing instrument for fiber research, production and inspection departments.

Meet the standard:

GB/T14338-2008.

Product Advantages:

Standard Compliance: Conforms to the latest national standard GB/T 14338-2022 for testing the crimping performance of man-made staple fibers.

Broad Applicability: Suitable for a wide range of fiber linear densities (1-22 dtex) and applicable to both natural and chemical fibers.

Versatile Tension Loading: Offers multiple tension loader ranges (0-5.00mN, 0-10.00mN, 0-25.00mN) with fine minimum division values for precise control.

High Measurement Resolution: Provides a high displacement resolution of 0.01mm for accurate length changes.

Automated Testing: Features automatic timing with selectable durations (30s, 60s, 120s) for consistent and efficient testing.

Clear Observation: Equipped with LED lighting for enhanced visibility of the fiber sample during testing.

Comprehensive Analysis: Determines crimp degree, crimp elasticity, and crimp recovery rate, providing a complete profile of fiber crimp performance.

Supports Key Departments: An essential tool for fiber research, production, and inspection departments.

Technical parameters:

1. tension loader range :0-5.00mN(minimum division value 0.01mN)

0-10.00mN(min. 0.02mN)

0-25.00mN(min. 0.05mN)

2. Initial length :20mm

3. lower clamp stroke :≤30mm

4. displacement resolution :0.01mm

5. timing: automatic

6. timing :30s, 60s, 120s

7.lighting :LED lights

8.Crimp count length :25mm

9.Power supply: AC 220V 50HZ


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Plastic Friction and Wear Tester
Plastic Friction and Wear Tester Product Description: Plastic sliding friction wear tester consists of two main parts: the host machine and intelligent control system, which can b...
American European bending tester
American European bending tester Test Purpose: To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose choking or i...
Standard pacifier safety tester
Standard pacifier safety tester Overview In the infant care industry, bottle quality directly impacts infant health. The NPNZ-01 Baby Bottle Mechanical Performance Tester is spec...
Cork Puncture and Chip Detection Instrument
Cork Puncture and Chip Detection Instrument The rubber stopper puncture debris detector is a device specifically used to detect the number of debris generated during the puncture process and ...
Safety Helmets Wearing Stability Tester
Safety Helmets Wearing Stability Tester Standard GB 811-2022: Safety Helmets – General Technical Requirements GB 24429-2009: Sports Helmets – Requirements and Test Methods ...
All supplier products

Same products

Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 Seller: Standard International Group (HK) Limited The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
Xenon Test Chamber
Xenon Test Chamber Seller: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester Seller: Qinsun Instruments Co., LTD Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester Seller: Qinsun Instruments Co., LTD Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
Furniture flammability tester
Furniture flammability tester Seller: Qinsun Instruments Co., LTD Product details Furniture flammability tester is mainly used to test the combustion performance ...