Titanium carbide hard guide wheels - Industrial transmission
The guide wheel exhibits exceptional corrosion resistance, maintaining integrity for over five years without rusting in chloride-rich humid environments—such as coastal industrial facilities—compared to conventional steel guide wheels, which typically last only three months under similar conditions. Its dense internal structure, with a porosity of less than 0.1%, effectively prevents coolant infiltration and subsequent internal cracking. During the copper tube drawing process, the guide wheel achieves a low friction coefficient of 0.08 against the copper surface, significantly reducing surface defects and increasing the product qualification rate from 85% to 99%. Constructed from hard alloy titanium carbide, the guide wheel demonstrates excellent thermal shock resistance, remaining crack-free under rapid temperature fluctuations from ambient conditions to 300°C and back, making it highly suitable for intermittent production operations. The guide wheel is available in a wide range of dimensions, with diameters spanning 50 mm to 500 mm and widths from 10 mm to 100 mm, enabling compatibility with various drawing and rolling equipment configurations. In optical fiber and cable manufacturing, it ensures precise fiber guidance, maintaining signal attenuation below 0.2 dB/km and supporting high-quality communication performance.
Send product request
Other supplier products
 |
Unfinished bar stock - heat treatable | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sintering of ultrafine TiCN powder (particle size: 1&nda... |
 |
High cost-performance chromium carbide powder | Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon conte... |
 |
Wear-resistant titanium carbide rods - Extended service life | The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm. It is suitable for secondary pro... |
 |
Chromium carbide powder with hardness HRC78+ | Chromium carbide powder can be compounded with other wear-resistant material powders (such as tungsten carbide and molybdenum disulfide) to form a ... |
 |
Mirror polished tantinium carbide round bars | Titanium carbide cermet rods (TiC rods) belong to the group of steel-jointed cemented carbides, which are composites of steel as the bonding phase ... |
