Automated spraying of chromium carbide powder
The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HRC65, making it suitable for applications that require high-stress wear, such as surface strengthening of excavator bucket teeth and crusher hammer heads. The bonding strength between the coating and the substrate is high, reaching over 50MPa, and it is not easy to peel off, ensuring long-term usage effect. In mining machinery, parts treated with chromium carbide coating can withstand the severe impact and friction of ores, and their service life is increased by 4 to 6 times. This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The particles have good dispersibility and are easy to mix with the metal matrix. After powder metallurgy sintering, highly wear-resistant parts can be produced. It is applicable to precision bearings, micro gears and other precision instrument components, which can reduce wear and improve the operational accuracy and stability of equipment.
Send product request
Other supplier products
 |
Titanium carbide powder for ceramic coating raw materials | Titanium carbide powder is a grayish-black ultrafine powder with a purity of over 99.9%, and an average particle size ranging from 0.5 to 5μm. I... |
 |
High-density titanium carbide rods have excellent performance | Hard alloy titanium carbide round rods, as a critical material in high-end manufacturing, exhibit exceptional corrosion resistance, demonstrating h... |
 |
Titanium carbide guide wheel - hard alloy wear-resistant | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Wear-resistant alloy chromium carbide powder | Chromium carbide powder is silver grey in colour and is an important metal-ceramic material with the chemical formula Cr₃C₂. It has high hardness... |
 |
Wear-resistant titanium carbide rods suitable for construction machinery | Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, whic... |
