Titanium carbide guide wheels - hard alloy industry
This type of guide wheel has extremely strong corrosion resistance. It can be used for more than five years without rusting in a humid environment containing chloride ions (such as a factory by the sea), while traditional steel guide wheels can only be used for three months. Its internal structure is dense, with a porosity of less than 0.1%, which can effectively prevent coolant from seeping into the interior and causing cracking. During the copper tube drawing process, the friction coefficient between the guide wheel and the copper tube is as low as 0.08, which can reduce surface scratches on the copper tube and increase the finished product qualification rate from 85% to 99%. The hard alloy titanium carbide guide wheel has excellent thermal shock resistance. It will not crack when the temperature rises sharply from room temperature to 300℃ and then drops sharply back to room temperature, making it suitable for intermittent production conditions. The size range of guide wheels is wide, with diameters ranging from 50mm to 500mm and widths from 10mm to 100mm, which can be adapted to different types of drawing or rolling equipment. In the production of optical fibers and cables, it can precisely guide optical fibers, keeping the attenuation rate of optical fibers below 0.2dB/km and ensuring the quality of communication.
Send product request
Other supplier products
 |
Titanium carbide hard rods - materials for hardware manufacturing | The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm, and it is amenable to secondary ... |
 |
Titanium carbide rods are available for small-batch purchase | Titanium carbide round rods made of cemented carbide exhibit excellent electrical conductivity, making them suitable for use as electrodes in elect... |
 |
Titanium carbide hard alloy guide wheel with strong load-bearing capacity | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Industrial titanium carbide rods - high surface finish | The length of this round bar can be customized according to requirements, ranging from 100mm to 1000mm, and it can undergo secondary processing suc... |
 |
Titanium carbide rods - highly efficient in mechanical processing | The manufacturing process of this round bar is highly stringent, with meticulous control over each stage—from the purity of titanium carbide ... |
