Titanium carbide powder, a raw material for wear-resistant and corrosion-resistant coatings
This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/(m·K), and can be used to make conductive ceramics, heating elements, etc. After being compounded with copper powder, the resulting composite material features both high hardness and high electrical conductivity, making it suitable for manufacturing spark electrodes, with the electrode loss rate reduced to below 0.1%. The particle size distribution of the powder is narrow, and the ratio of D50 to D90 is less than 1.5, which can ensure the uniformity of the density of the formed green body and reduce the deformation after sintering. In the field of electronic packaging, it can be used to prepare high thermal conductivity packaging materials to solve the heat dissipation problem of chips. With the development of the new energy industry, titanium carbide powder is also applied in lithium-ion batteries. When used as an anode material, its theoretical capacity reaches 350mAh/g and its cycle life exceeds 1,000 times. After the surface of the powder is coated with a layer of carbon, its conductivity is further enhanced, and the charging and discharging efficiency of the battery is increased to over 95%. In the field of energy storage, it provides a new direction for the research and development of high-performance batteries and promotes the progress of new energy technologies.
Send product request
Other supplier products
 |
Titanium carbide hard rod drilling tool material | Titanium carbide round rods made of cemented carbide are high-performance materials fabricated through a powder metallurgy process, with titanium c... |
 |
Titanium carbide guide wheel - hard alloy wear-resistant | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Titanium carbide powder with excellent thermal stability | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
 |
Titanium carbide powder resistant to high-temperature oxidation at 800℃ | The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements... |
 |
ISO certified carbide guide wheel guide roller | Guide roll (guide wheel) is the steel field bar, wire rod rolling equipment on the main consumption of spare parts, in the rolling process, to ensu... |
