soft tube filling and sealing machine CFNY- 60A
CFNY-60A TUBE FILLER SEALER
(applicable to plastic tubes、laminated tubes)
Inner-heating type
Parameters:
Adapt to the maximum tube diameter: 60mm
The maximum volume:1- 250ml
Produce speed: 30-60tube/min
Filling precision:≤+/-1%
The power of machine：1.1kw
Air pressure: 0.4-0.6 Mpa
Features:
1、Tubes can load into station automatically and can be automatically pressed into the tube holder.
2、The elastic tension type tube holder is adoped to guarantee the consistent sealing height.
3、The automatic color mark adjusting systems by stepping driving tube holder is adopted for oval tubes or other special-shaped tubes.
4、Adopt mechanical transmission mode filling system ensuring the stability of loading capacity.
5、Original Swiss LEISTER heater is adopted .
6、The internal wall of tube adopts hot air sealing and the external wall of tube adopts cooling water circulative cooling,which can beautiful sealing effect.
7、The fan (made in Taiwan) is adopted to discharge the poisonous gas produced during the heating outside the room.
8、After the sealing, the wind cooling system is adopted to prevent the heat from being conducted to the ointment.
9、PLC automatic control system.
10、Highly clearl stainless steel frame.
11、The connection of emulsifier、cartoning machine and filling machine can be easily achieved.
12、It is easy to operate between different sizes of tubes.
13、Automatic completion of filling 、sealing and batch No. printing in one machine.
14、Provided such functions as automatic supply of a tube to a worktable of machine、tube color mark automatic adjustment in a holder and automatic filling and sealing.
15、Speed shall be adjustable by inverter.
16、The production capacity can be realized and control automatically.
17、The code mechanical hand print the code automatically in the request position.
18、Human-machine interface with direct display and control.
19、Tube feeding and locating device,which is controlled by the original FESTO vacuum generator.
22、Provided with malfunction alarm,automatic stopping device when mechanical overload.
23、The combined material feeding forms of blow cutting and cutting can guarantee the filling of high viscosity.
24、Column stylel material temperature automatic control blending system.(optional)
25、Ultrasonic hopper level sensor. (optional)
USA BANNER ultrasonic level probe combined with Siemens module can be used to accurately control material level and give direct display on the touch screen
26、No tube no fill.
27、Material pump. (optional)
28、Water cooler(chiller). (optional)
30、 Emergency stop button
Send product request
Other supplier products
|
|
soft tube filling and sealing machine CFNY- 60A | CFNY-60A TUBE FILLER SEALER (applicable to plastic tubes、laminated tubes) Inner-heating type Parameters: Adapt to the maximum tube diameter: 60m... |
 |
RB-1 Thaw tester | BJ-1 Disintegration tester Product Description BJ series of instruments are used for detecting disintegration of solid in prescriptive conditions ... |
 |
tablet press | DP-12model single tablet press machine is to absorb advanced technology successfully developed. It is pharmaceutical, laboratory and other industr... |
 |
China pharmaceutical machine for tablet tube filling and sealing machine | The BSP-40A Tube filling Machine For Tablet is applicable to the packing bigger and thinner tablets which are orderly fed into bobbin bottles in si... |
 |
China pharmaceutical machine forTablet laser drilling machine | This JK250-A laser drilling machine used to drill holes in the surface of coating pharmaceutical tablet. Machine data : Capacity(speed) 5000... |
