Gravel Resistant Impact Tester

Produced by: Standard International Group (HK) Limited

All supplier products

Standards

Product Advantages

Precision Impact Simulation: Replicates real-world gravel impact scenarios (e.g., road debris, aviation particle strikes) with adjustable speed and angle controls.
Multi-Industry Applicability: Essential for automotive body panels, aircraft skins, train coatings, and architectural finishes.
High-Speed Airflow System: Generates consistent particle velocities (20–120 m/s) for repeatable testing across samples.
Modular Design: Interchangeable nozzles and sample fixtures accommodate diverse component geometries (e.g., curved automotive panels, flat building materials).
Advanced Safety Features: Enclosed testing chamber with integrated debris shield and emergency stop function.
Data-Driven Analysis: High-resolution camera system captures pre/post-test images for quantitative damage assessment (dents, cracks, delamination).

Product Features

Airflow Control System: Digital regulation of air pressure (0.2–0.8 MPa) and particle velocity for standardized testing.
Adjustable Impact Angle: 0–90° tilt mechanism to simulate horizontal, vertical, or oblique impact angles.
Sample Fixtures: Universal clamps for securing automotive panels, aerospace composites, or building materials up to 500×500 mm.
Touchscreen Interface: Programmable test cycles, air pressure, and impact angles with real-time data logging.
Debris Recycling System: Integrated funnel and vacuum system for automated gravel collection and reuse.
Safety Interlocks: Transparent enclosure with light curtains to halt operation during access attempts.

Technical Parameters

Parameter	Specification
Impact Angle	0–90° adjustable (1° increments)
Particle Velocity	20–120 m/s (adjustable)
Sample Dimensions	Up to 500 × 500 mm
Gravel Size	3–16 mm (customizable)
Air Pressure Range	0.2–0.8 MPa (29–116 psi)
Control System	PLC with 7-inch touchscreen (100 test memory)
Power Supply	220V/50Hz, 500W
Dimensions	800 (L) × 700 (W) × 1,200 (H) mm
Net Weight	150 kg
Safety Rating	CE/ISO 12100 compliant

Send product request

	AC/DC High - Voltage Testing Machine for Automotive Wires-QINSUN	The AC/DC high - voltage tester for automotive wires is specially used to test the insulation between wire cores or between wire cores and outer ...
	Thermal Insulation Rock Wool Thermal Load Test Device	The thermal insulation rock wool thermal load test device is a test device developed according to the technical conditions stipulated in the Nation...
	Paper stiffness tester	Compliance Standards: ISO 5628、ISO 2493 TAPPI T489、TAPPI T556、JIS P 8125 Product Introduction: ZY-TDY300 microcomputer bending stiffness tester...
	Automobile wire corrugated pipe drag grinding machine	Standards: ISO 6722. QC/T730. JIS C 3046. JASO D 611. SAEJ1128-2005. JBT 8139.TBT 1484.1-2001 Part1. EN50305. EN50306and other standards Parame...
	Geomembrane thickness tester	Scope of application: Used to determine the thickness of smooth geomembrane and other plastic films under specified pressure and time. The sample ...

Seat Bumping and Creep Test Bench	Seller: Standard International Group (HK) Limited	This test bench is used for simulating the car seat bumping and creep situation when a car is run...
Automobile seat belt fixed point test bench	Seller: Standard International Group (HK) Limited	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur...
Impact strength tester for car seat headrest	Seller: Standard International Group (HK) Limited	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi...
Impact strength tester for car seat launching headrest	Seller: Standard International Group (HK) Limited	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w...
Automobile Headrest Strength Tester	Seller: Standard International Group (HK) Limited	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me...