STD 5 explosion-proof high pressure cleaner
STD 5 high pressure 2D cleaner
This2D pneumatic high pressure tank cleaning nozzle is suitable for flammableand explosive cleaning occasions.
Working Principle:
The series of cleaners are driven by an external pneumatic motor to rotate the cleaning head,and the cleaning head can be installed at different angles to achieve a maximum of 270 degreesof cleaning which can not only meet user requirements but also meet cleaning requirements. Fan or water jet mode optional.
Features & Benefits:
●Highmechanical energy:
Jet flow is produced by combining pressure and flow, which can achieve a large cleaning distance and range.
●Thekinetic energy of flushing water generated by pressurized high-pressure pump can effectively remove the residue inside
the container.
●Low leakage:
With only 1% of the leakage, 99% of the cleaning fluid can be used for cleaning, enabling the tank washer to maximize the
mechanical benefits, greatly reducing the cleaning time and temperature dependence.
●Various possible spray patterns using different nozzle arrangements on the spray head.
●All parts of the same type are interchangeable and easy maintenance, to ensure an efficient cleaning.
Send product request
Other supplier products
 |
Reciprocating Wear Tester | Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate... |
 |
Car wire heat resistant water (salt water) testing machine | Standards ISO 6722-1. SAE J1128: Global standards for electrical cable resistance to fluids and thermal aging. QC/T 730. JASO D611: Chinese and... |
 |
45-degree dry cleaning tester | Product Introduction: The instrument is composed of a bottom plate, a control panel and a drum. The clothes to be washed and the dry cleaning agen... |
 |
New energy wire and cable extrusion & scraping tester | Product Introduction: The new energy wire and cable extrusion jacket scratching tester is used to test the scratching resistance of the plastic ... |
 |
High - temperature Pressure Testing Device | Standards ComplianceISO 6722, SAEJ 1128, QC/T 730, GB/T 33549, CQC1103 - 1105 - 2015, etc. Main Configurations 1. Testing device: 2 - station or ... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
