Stainless Steel Static Spray Balls
Stainless steel static spray balls
Model NO.: STD Series
Working Principle:
Through the scientifically arranged nozzle holes on the spherical surface of the spray ball, the water jet is sprayed from the nozzle holes to the inner surface of the tank to achieve the purpose of cleaning.
Features & Benefits:
● Simple structure and low cost
● For higher flow rate
● Bssically no maintenance, steam and compressed air can be passed, self-draining
● 360 degree coverage or 180 degree coverage
●Simple structure, low price, basically no maintenance, steam and compressed air can be passed, self-draining
Application:
The fixed cleaning ballis used in the food and beverage industry to clean tanks. Fixed spray balls are used for lower cleaning tasks. For high flow and steam injection.Static Spray Balls project a predetermined spray pattern based on the drilling arrangement of the holes within the ball. Typically, rinsing is accomplished by creating the desired coverage and cascading effect required for the relative cleaning task.
Send product request
Other supplier products
 |
Automotive Wires Low - temperature Winding Tester | Standards ISO 6722-1. ISO 14572: Global benchmarks for electrical cable flexibility and low-temperature performance. ISO 19642: Road vehicle wi... |
 |
AKRON abrasion testing machine | Product Introduction AKRON wear testing machine is used with the balance, specially testing the wear resistance of rubber products such as soles, ... |
 |
(Ford) Automotive wire flexibility testing machine | Scope of application: Suitable for wire flexibility test with nominal cross-section ≤3.0mm2. Applicable standards: Engineering Specification-... |
 |
Schopper Abrasion Tester | Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust... |
 |
MMT Liquid Water Separation Tester-QINSUN |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
