BKNET-0102 Welded Pipe Eddy Current Flaw Detector

• 

Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.

Eddy current weld testingis a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.

Eddy current testing is a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.

BKNET-012 NDT weld testing equipment is used for on-line and off-line inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.

BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance

BKNET-0102 Welded Pipe Eddy Current Flaw Detector Features:

High precision end and end-to-tail signal removal

High precision real-time, delayed alarm output

Fast digital／analog electronic balance

Memory track delay blanking function

Non-equal amplitude phase／amplitude alarm domain

Remote automatic help system

Synchronous alarm output for internal and external clock control

BKNis an eddy current testing benchmark enterprise and has long been committed to the development and production of bearing hardness and crack eddy current screening equipment. If you want to know more details or want a quotation, just feel free to contact us!

Другие товары поставщика

	Portable Magnetic Flux Leakage Testing Equipment	Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects...
	Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02	During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all d...
	BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator	Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ...
	Eddy Current Testing for Auto Parts	NDTApplication: Eddy current hardness testingtechnology has been widely used in the detection of metal components in the automotive The eddy cur...
	Bolt Eddy Current Sorter BKNFX-11	The technology of BKNoriginated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leadi...

Похожие товары

	Hot Forging Of Steel Billets	Продавец: Chengdu Duolin Electric Co.,Ltd	Hot Forging Of Steel Billets Induction is refered to heat the metal part to forging temperat...
	Lost Wax Casting Y Piece FlowSplit Fitting	Продавец: Qingtian Baoli Casting Co., Ltd.	Lost Wax Casting Y Piece FlowSplit Fittingis produced through the lost wax casting method, enabli...
	Mini Nitrogen Generator	Продавец: 0000	Mini Nitrogen Generator Mini Nitrogen Generator Are you looking for a reliable, cost-effe...
	filter press in chemical industry	Продавец: 00000	Our for Chemical Industry is designed to meet strict safety and environmental standards, en...
	Laser Cutting Service China METAL FINISHING	Продавец: Dalian Zhuosheng Technology Co., Ltd	Laser Cutting Service ChinaMETAL FINISHING Laser Cutting Service ChinaMETAL FINISHING-China Da...