ROSS zigzag tester

• 

Product Introduction:

The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is directly above the center of the rotating shaft of the ROSS zigzag test machine, and drove the test piece to perform free 90-degree zigzag on the shaft through the ROSS zigzag test machine. After a certain number of tests, the length of the test piece incision is measured. The zigzag resistance of the test piece was evaluated by the size of the notch growth rate.

Reference standard:

GB/T2099-2007. ASTM-D1052. ISO-5423. SATRA TM60. HB-T2411HG/ T2411 and other standards

Product Advantages:

Measures Key Durability: Quantifies the resistance of sole materials to flex cracking and notch growth, a vital indicator of footwear lifespan.

Standard Compliant (ROSS Method): Designed to meet numerous relevant international and national standards (ASTM D1052. SATRA TM60. etc.) specifically for the ROSS flex test.

Quantitative Result: Provides objective data based on the measured growth rate of the pre-cut notch.

Multiple Testing Stations: Allows simultaneous testing of multiple test pieces (12), significantly increasing testing efficiency.

Controllable Test Parameters: Enables precise setting and control of the bending angle (90$pm$2º) and flexing speed (0-100 r/min).

Automatic Stop Function: Can be set to stop automatically after a specified number of test cycles.

Suitable for Sole Materials: Specifically designed for evaluating the flex fatigue characteristics of sole strips.

Technical parameters:

1. simultaneous measurement: (12 test pieces)

2. bending Angle: 90±2º

3. speed: 0-100r/min can be switched.

4. controller: LED-SLD806 integrated display control function

5. hole punch: 2.5mm

6. Test mode; Automatic stop when the test time is reached

7. fixture features: can test the sole at the same time can test pieces

8. zigzag shaft diameter: 10mm.

9. sample method: sole test piece

10. sample size: 152×25mm

11. Power supply: AC220V,10A

Random configuration:

1. One machine

2. 1 knife die

3. One power cable

4. One cutting knife

5. One copy of instructions

6. One delivery note

Другие товары поставщика

	Nanofiber electrospinning device	The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easily produce nanofibers with diameters of 50 to 800 nm. This dev...
	Dry microbial penetration resistance tester ISO 22612 YY / T 0506.5-2009	Standards: ISO 22612; YY / T 0506.5-2009; Product Information: DryMicrobial Penetration Resistance Testeris designed to determine determine the ...
	Static Honest Meter	Standards: JIS L 1094 GB/T 12703 Applications: Static Honest Meter is a measuring instrument for attenuation of static electricity, most a...
	Maeser Water Penetration Tester	Applications: Maeser Water Penetration Tester is used to test footwear upper leather dynamic water resistance. It is suitable for all kinds of s...
	Mask Synthetic Blood Penetration Tester	Medical Face Mask Synthetic Blood Penetration Resistance Tester Medical masks synthetic blood penetration tester is used to determine the resistan...

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...