Enameled Wire Stripping Machine

• 

Installation and use of enameled wire stripping machine.

Choose appropriate peeling wheel and install them on the machine. Put two enameled wire in the middle of the peeling wheels, set up two peeling wheels to clamp the enameled wire and gently hold the coil part with your hand then press the switch. To test the stripping effect, you can adjust the pressure between the two peeling wheels and control to achieve the ideal effect. When you start, put the enameled wire between two peeling wheels then pull out the wire easily from the wheels. So the peeling work is completed. For when the machine works, high-speed peeling wheels will rub against the insulation and the oxides of the enameled wire. After being peeled, the surface is shiny clean. When the surface of the nylon fiber peeling wheel is uneven or bump, it can cause disconnection or dirty peeling wheel. Fixing is required under this circumstances. You can use a cloth to smooth the wheel until the two strip wheel can smoothly contact. Regularly trim the peeling wheel and this will increase the life of the peeling wheel. When you need to replace the wheel, you can start the work again as long as you remove the wheel that you can no longer use, and then insert the new paint wheel. When we install wire stripping wheel, it should be noted that the wire wheel has direction.

Safety technical operation procedures.

1. When an abnormal situation occurs in the work, the power supply should be cut off immediately, and the concerned person should be asked to check and troubleshoot.
2. When scraping the enameled wire, it is necessary to prevent the enameled wire from being sucked into theenameledwire stripping machineand pay attention to the heat of the enameled wire.

3. Shut down the power supply when the enameled wire is not scratched.

Другие товары поставщика

	Pneumatic Wire Stripping Machine	Pneumatic Wire Stripping Machine BJ-0320 Magnetic Pneumatic Wire Stripping Machine * Cable cross section: 0.03 – 2.08 mm² (3...
	BJ-T10 Automatic Screw Dispenser	Operation Video ofBJ-T10 Automatic Screw Dispenser Feature ofBJ-T10 Model: BJ-T10 L≥ 1.2P(The diameter of screw) versatility, flexible o...
	Pneumatic Terminal Crimping Machine	Pneumatic Terminal Crimping Machine Cable Hydraulic Crimping Machine BJ-30T * Force:20Ton* Applicable Scope:1-200mm² wire* Strok...
	Enameled Wire Stripping Machine	Enameled Wire Stripping Machine XC-0316 Enameled Wire Stripping Machine * Model: XC-0316* Wire Size Range: 0.3 ~ 2.5mm* Stripping Len...
	Automatic Tape Dispenser	M-1000 Automatic tape dispenser * Tape Width: 7 ~ 50mm* Cut Length: 5 ~ 999mm, Digital Length Adjustment.* Length setting: Digital* Ac...

Похожие товары

	Rail Welder A Frame aligners railway welding tools	Продавец: 834406	产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。
	2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	Продавец: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
	Horizontal Machining Center	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...
	Horizontal Lathe	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool...
	Gantry Machining Center	Продавец: Xilong (Shanghai) Machine Tool Co., Ltd.	SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty...