Dry Cleaning & Washing Cylinder

• 

Introduction
The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.
It is used to test the color fastness for the dry cleaning and chlorine water washing fabrics.

Application
Dry cleaning and washing cylinder is designed to determine the color fastness for the dry cleaning and chlorinated pool water, with the aim to prepare samples for flammability testing.

Standards
AATCC 162 Colorfastness to water: Chlorinated pool.
16CFR PART 1610Standard for the flammability of clothing textiles.

●prepare the hardness concentrates according to the relevant standards.
●51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.
●If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
●5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
●Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
●Get out the sample and remove the excess solution.

Другие товары поставщика

	Spectral Density Analyzer	Standard The SpectroDensitometer YD5000 complies with international standards includingISO 5-4.CIE No.15. andISO 13655. ensuring reliable and stan...
	Initial Adhesion Tester	The initial - tack tester, also known as the initial - tack property tester or adhesive tape tackiness tester, is an instrument specifically used t...
	Cone Calorimeter Heat Release Test Machine	Products Heat release quantity is the core parametersto evalatethe fire behavior of materials and products.TESTech'sCone Calorimeter canmeet all e...
	Scratch-resistance testing machine for low voltage wire and cable for road vehicles	Product Introduction: Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface of...
	Dry and Wet Retroreflectometer	Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry and wet sand abrasive wear testing machine is mainly us...

Похожие товары

	Liquid Sliding Penetration Comprehensive Performance Tester	Продавец: Qinsun Instruments Co., LTD	G373 Liquid penetrating and strike-through comprehensive performance tester - Penetrability test ...
	Nonwovens liquid loss tester	Продавец: Qinsun Instruments Co., LTD	Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric mate...
	Elmendorf Tearing Strength Tester	Продавец: Qinsun Instruments Co., LTD	G008 Manual Tearing Tester - Material Tear Resistance Test G008Manual Tearing Tester, The Elmend...
	Dry Cleaning & Washing Cylinder	Продавец: Qinsun Instruments Co., LTD	IntroductionThe dry cleaning and washing cylinder consists of a stainless steel rotary test chamb...
	Rotary Rubbing Color Fastness Tester (Crockmeter)	Продавец: Qinsun Instruments Co., LTD	Standard AATCC 116: Colorfastness to Crocking (American Association of Textile Chemists and Co...