IEC62133 & UN38.3 Battery Crush / Squeeze Test Equipment
Applications
Test battery safety performance through crush, after test the sample shall not explode or catch fire.This equipment becomes necessary inspection equipment for the battery manufacturer and researcher.
Standard Compliance
MT/T1051-2007 Lithium-ion batteries for cap lamp --Crush Test
UL 1642Lithium Batteries --Crush Test
UL 2054Lithium Batteries
GB/T 2900.11-1988Terminology of (secondary) cell or battery
YD 1268- 2003 The safety specification and test method for lithium batteries and charger--crush test
SJ/T 11169-1998Standard for lithium batteries crush test
GB/T 8897.4-2002Primary batteries: Safety of lithium batteries --crush test
SJ/T 11170-1998Standard for household and commercial batteries --crush test
YDB 032-2009Back-up Lithium-ion battery for telecommunications
QB/T 2502-2000 General specification of lithium-ion battery --crush test
Specifications
1.Factory direct sale
2.Certificate:ISO
3.Can be customized
4.Good after-sale service
5.Warranty: 12 months
Features
1.The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.
2.Lighting system is designed to observe the internal testing process;
3. Nail Penetration/Crush Force controllable within range from 250N to 13KN ,meet different standards;
4.Wire hole provides a possibility to test internal temperature or air pressure while vent hole with air blower can discharge the exhaust air.
5.Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter, which can reduce the noise and improve safety.
Technical Parameters
|
Model |
BE-6045 |
|
Pressure(KN) |
20 |
|
Max. Displacement(mm) |
200,300,500 |
|
Additional Function(Optional) |
Voltage, Temperature Sampling, Camera Monitoring system, Fire-extinguishing system, explosion-proof system, smoke evacuation system |
|
Crush Speed |
0 ~ 40mm/min(Controllable ) |
|
Testing Space (mm) |
200X200X200MM, 300X300X300MM or Customize |
|
External Dimension |
W680 X D570 X H1740 |
|
Optional Function |
|
|
Power |
0—10V,0--100V |
|
Temp. Sampling Range |
0 ~ 1200℃ |
|
Power, Temperature Accuracy |
±1%FS |
|
Voltage Resolution |
1mV |
|
Temp. Resolution |
0.1℃ |
|
Main Technical Parameters |
|
|
Speed |
0 ~ 40mm/min(Controllable ) |
|
Crush Range |
0—300MM optional |
|
Structure |
Vertical&horizontal (select according to actual size) |
|
Testing Condition |
Applied force of 13KN, once the maximum pressure has been obtained it is to be released. |
|
Crush Method |
Vertical, Horizontal |
|
Crush Deformation |
No (Computerize can be customized) |
|
Crush Remaining Time |
0~99 hours 99 mins 99 seconds |
|
Driven Method |
Hydraulic |
|
Crush Accuracy |
±1% |
|
Structure |
|
|
Cabinet |
Independent vertical & horizontal test machine and control system |
|
Communication |
No (Computerize can be customized) |
|
Crush Clamps |
Planer crush tray, fixtures in different size upon the different standard |
|
Data Capture Module |
Independent remote sampling, multi voltage, temp.,current acquisition channels (optional ); |
|
Standard Channel Quantity |
2-channel,4-channel,8-channel,various data acquisition system (optional ) |
|
Camera Monitoring System |
Test zone installed with high definition camera monitoring system in remote control with explosion-proof (optional). |
|
Standard Configuration |
Crush machine 1 set, control cabinet 1 set, crush tray/1 pcs |
|
Testing Clamp |
Customize according to actual operating condition. |
|
Power |
AC380V 50HZ 3 Phase 5 Wire |
|
Working Condition |
0℃~45℃ |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
|
|
IEC62133 & UN38.3 Battery Crush / Squeeze Test Equipment | Applications Test battery safety performance through crush, after test the sample shall not explode or catch fire.This equipment becomes necessary... |
 |
High Low Temperature/ Alititude Test Chamber BTHQ series--Standard Vacuum Chamber | Applications This equipment is widely applied for aviation, communication ,electronic etc. industries, instruments and meters ,electric products, m... |
 |
Comprehensive Lithium Battery Safety Performance Testing System BE-JKXT-08 | 1. Introduction Integral Battery safety control system is mainly appliedto test battery performanceswhen batteryin hazard environment or damaged ex... |
 |
Double Wings Package Drop Impact Tester Drop Testing Machine BF F 415D | Applications Drop Impact Test machineis to test large and heavy package products’ drop impact performance throughsimulate real face ,edge and... |
 |
Lithium Battery Forced Short Circuit Temperature Control Testing Equipment | Introduction Battery large current short-circuit machine is designed to comply with standard; According to the short-circuit test requirement,the s... |
Похожие товары
 |
BS EN 12600 Two Tyres Impactor | Продавец: Qinhuangdao Yuanchen Technology Equipment Co., Ltd. | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m... |
 |
Hast Pct High-Low Temperature Test Chamber with Pressure | Продавец: AI SI LI (Китай) Test Equipment Co., Ltd. | HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali... |
 |
Programmable Hast Accelerated Aging Tester for Industry | Продавец: AI SI LI (Китай) Test Equipment Co., Ltd. | HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ... |
 |
CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard | Продавец: AI SI LI (Китай) Test Equipment Co., Ltd. | CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th... |
 |
Package Large Scale Simulation Transportation Vibration Tester | Продавец: AI SI LI (Китай) Test Equipment Co., Ltd. | This machine is used to simulation testing damage between transport for various package stuff, PC... |
