.

IEC62133 & UN38.3 Battery Crush / Squeeze Test Equipment

Applications

Test battery safety performance through crush, after test the sample shall not explode or catch fire.This equipment becomes necessary inspection equipment for the battery manufacturer and researcher.

Standard Compliance

MT/T1051-2007 Lithium-ion batteries for cap lamp --Crush Test

UL 1642Lithium Batteries --Crush Test

UL 2054Lithium Batteries

GB/T 2900.11-1988Terminology of (secondary) cell or battery

YD 1268- 2003 The safety specification and test method for lithium batteries and charger--crush test

SJ/T 11169-1998Standard for lithium batteries crush test

GB/T 8897.4-2002Primary batteries: Safety of lithium batteries --crush test

SJ/T 11170-1998Standard for household and commercial batteries --crush test

YDB 032-2009Back-up Lithium-ion battery for telecommunications

QB/T 2502-2000 General specification of lithium-ion battery --crush test

Specifications

1.Factory direct sale

2.Certificate:ISO

3.Can be customized

4.Good after-sale service

5.Warranty: 12 months

Features

1.The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.

2.Lighting system is designed to observe the internal testing process;

3. Nail Penetration/Crush Force controllable within range from 250N to 13KN ,meet different standards;

4.Wire hole provides a possibility to test internal temperature or air pressure while vent hole with air blower can discharge the exhaust air.

5.Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter, which can reduce the noise and improve safety.

Technical Parameters

Model

BE-6045

Pressure(KN)

20

Max. Displacement(mm)

200,300,500

Additional Function(Optional)

Voltage, Temperature Sampling, Camera Monitoring system, Fire-extinguishing system, explosion-proof system, smoke evacuation system

Crush Speed

0 ~ 40mm/min(Controllable )

Testing Space (mm)

200X200X200MM, 300X300X300MM or Customize

External Dimension

W680 X D570 X H1740

Optional Function

Power

0—10V,0--100V

Temp. Sampling Range

0 ~ 1200℃

Power, Temperature Accuracy

±1%FS

Voltage Resolution

1mV

Temp. Resolution

0.1℃

Main Technical Parameters

Speed

0 ~ 40mm/min(Controllable )

Crush Range

0—300MM optional

Structure

Vertical&horizontal (select according to actual size)

Testing Condition

Applied force of 13KN, once the maximum pressure has been obtained it is to be released.

Crush Method

Vertical, Horizontal

Crush Deformation

No (Computerize can be customized)

Crush Remaining Time

0~99 hours 99 mins 99 seconds

Driven Method

Hydraulic

Crush Accuracy

±1%

Structure

Cabinet

Independent vertical & horizontal test machine and control system

Communication

No (Computerize can be customized)

Crush Clamps

Planer crush tray, fixtures in different size upon the different standard

Data Capture Module

Independent remote sampling, multi voltage, temp.,current acquisition channels (optional );

Standard Channel Quantity

2-channel,4-channel,8-channel,various data acquisition system (optional )

Camera Monitoring System

Test zone installed with high definition camera monitoring system in remote control with explosion-proof (optional).

Standard Configuration

Crush machine 1 set, control cabinet 1 set, crush tray/1 pcs

Testing Clamp

Customize according to actual operating condition.

Power

AC380V 50HZ 3 Phase 5 Wire

Working Condition

0℃~45℃



在线联系供应商

至: 东莞市贝尔实验设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Tensile Test Machine 5KNS
Tensile Test Machine 5KNS Application This equipment is designed and manufactured tomeasure & test tensile strength, compression strength, peeling strength, tearing...
2 or 3-Zone Constant Temperature Thermal Shock Chamber Testing Machine
2 or 3-Zone Constant Temperature Thermal Shock Chamber Testing Machine Applications This equipment is widely applied for electronic and electric products, components and materials by constant high low temperature, temp...
Double Wings Package Drop Impact Tester Drop Testing Machine BF F 415D
Double Wings Package Drop Impact Tester Drop Testing Machine BF F 415D Applications Drop Impact Test machineis to test large and heavy package products’ drop impact performance throughsimulate real face ,edge and...
DGBell Environmental Low / high Temperature & Damp Heat Test Chambers
DGBell Environmental Low / high Temperature & Damp Heat Test Chambers Application . Standard Compliance : GB/T10586-2006 Specifications for damp heat chambers,GB/T10592-1989 Specification for low/high temperature test...
Comprehensive Environmental Temperature Humidity Vibration Testing Machine
Comprehensive Environmental Temperature Humidity Vibration Testing Machine General Intraduction This equipment complied with national standard, able to satisfy special testing requirements ,is widely applied for electronic...
供应产品

Same products

Safety Glass Impact Test Device - Headform Impact Test Device
Safety Glass Impact Test Device - Headform Impact Test Device 卖方: 秦皇岛源辰科技设备有限公司 Safety Glass Impact Test Device - Headform Impact Test Device Related Standard: ISO 3537 Road veh...
BS EN 12600 Dual Tyre Glass Impact Test Equipment, Construction Glass Impact Test
BS EN 12600 Dual Tyre Glass Impact Test Equipment, Construction Glass Impact Test 卖方: 秦皇岛源辰科技设备有限公司 BS EN 12600 Dual Tyre Glass Impact Test Equipment, Construction Glass Impact Test Reference Stan...
Leather Bag Impactor 45kg/46kg
Leather Bag Impactor 45kg/46kg 卖方: 秦皇岛源辰科技设备有限公司 Leather Bag Impactor 45Kg/46 kg Function: Used as impactor for tempered glass and laminated glass...
ISO 3537 人头模型用毛毡帽
ISO 3537 人头模型用毛毡帽 卖方: 秦皇岛源辰科技设备有限公司 名称:毛毡帽 材质:羊毛毡 半径:95 mm 厚度:5 mm 功能:用于人头模型,以评定安全玻璃在受到钝物,大体积物体的冲击下的最小强度和内聚力。 参照标准:GB/T 5137.1 汽...
Glass and alzing Products testing Machine
Glass and alzing Products testing Machine 卖方: 秦皇岛源辰科技设备有限公司 Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1)...