Textile stress and strain tester for garments

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

Full-Body Garment Stress Tester is used to evaluate the pressure exerted by various form-fitting garments or other wearable apparel on the human body. It quantifies the perceived pressure of clothing on the body into specific numerical data and enables assessment of test results. The manikin can perform both static and dynamic testing.

Dynamic postures meet the following requirements, considering the integrity of the form: the rear of the knees must not be left unprotected.

Standards

FZ/T 70015-2022 :Test Methods and Evaluation of Pressure in Knitted Compression Garments

Features

1.Accurate measurement of garment pressure at multiple body locations with high-resolution sensors.

2.Supports bothstaticanddynamic testing, simulating real-life movement and posture.

3.Pressure mapping allows objective evaluation of garment comfort and functionality.

4.Dynamic mannequin posture designed to maintain full body integrity, with clearance behind knees.

5.Enables design optimization for sports, medical, and fashion applications through data-driven analysis.

Parameters

Item	Specifications
Pressure Mannequin	Average Asian female body type, height: 155 ~ 165 cm
Pressure Measurement Range	0 ~ 90 mmHg
Test Accuracy	≤0.1 mmHg
Resolution	≤0.1 mmHg
Sensors	26 independent sensors, each measuring a separate point. The sensor surface is flat and stable, with no mutual interference between measurement points.

Test Procedures

I. Equipment Preparation and Calibration

Parameter Verification: Ensure equipment complies with FZ/T70015-2022 standards. The pressure manikin uses the average Asian female physique (height 155–165 cm).

Sensor Inspection: All 26 sensors must have flat surfaces and stable configurations to ensure independent measurements without interference.

‌Range Calibration: Pressure measurement range 0–90 mmHg, test accuracy ≤0.1 mmHg, resolution ≤0.1 mmHg.

II. Test Procedure

‌1. Static Testing:

Place the garment over the pressure manikin and adjust to the standard posture (void space behind knees).

Activate the equipment, record pressure values at each point, and analyze pressure distribution uniformity.

2. Dynamic Testing:

Simulate movement postures (e.g., running, jumping) and observe pressure changes.

Focus on pressure values in high-activity areas (e.g., armpits, waist).

III. Data Interpretation and Optimization

1. Comfort Assessment:

Excessive pressure (>90 mmHg) may cause constriction, while insufficient pressure fails to provide adequate support.

Optimize pressure distribution by adjusting fabric elasticity or cutting techniques.

2. Function Verification:

Performance compression garments must deliver moderate pressure to key muscle groups (e.g., thighs, calves) to reduce muscle vibration.

Medical garments must ensure uniform pressure distribution to prevent blood circulation obstruction.

Другие товары поставщика

	Medical Injection Needle Stiffness Measuring Device	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB 18457-2001 This standard mandates precise control over needle wall thickness ...
	Carbon Black Content Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. ...
	Low Temperature Wire Winding Tester for Automotive Cable	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire Low-Temperature Winding Tester is designed for evaluating...
	Laboratory 3D Surface Topography Profiler	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system’s analysis capabilities and software design support surface met...
	CE Certified High Frequency Friction Machine Factory	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The High Frequency Friction Machine is a reciprocating tribological testing i...

Все товары поставщика

Похожие товары

	Nylon High Strength Sewing Thread	Продавец: Hangzhou Fantex Textile Co., Ltd	Nylon high strength sewing thread(nylon thread) selects high toughness nylon filament as raw mate...
	HMPE Yarn	Продавец: Hangzhou Fantex Textile Co., Ltd	Fantex high strength polyethylene yarn is a premium HMPE Yarn(High Modulus Polyethylene Yarn), re...
	Nylon Fishing Twine	Продавец: Hangzhou Fantex Textile Co., Ltd	Our nylon fishing twineis made from high tenacity nylon twine , ensuring a long-lasting and relia...
	High Tenacity Polyester Bonded Thread	Продавец: Hangzhou Fantex Textile Co., Ltd	High Tenacity Polyester Bonded Threadis a kind of industrial filament sewing thread made of high ...
	Nylon Multifilament Yarn 6	Продавец: Hangzhou Fantex Textile Co., Ltd	PA6 Multifilament Yarnis a high-strength, continuous syntheticnylon yarncomposed of multiple fine...