TPU Slip Masterbatch & Frosted Matte Masterbatch for Engineering Plastics
Anmei company specializes in the production of TPU slip masterbatchingredients and TPU frosted matte masterbatch excellent dispersibility in cast films. Casting film can be compounded with plastic woven cloth during production to be used as shade cloth and tourist tents.
TPU anti-block masterbatch is designed to prevent blocking during the extrusion of thin TPU film and improves the bound ability of TPU film.
Problem & Solution of Masterbatch Application in Cast Film
Problem1:
Moisture in the tpu masterbatchor poor heat resistance of the ingredients will cause the cast film to have a network structure.
Solution1:
Appropriately reduce the temperature of each zone and dry the masterbatchin the cast film production process.
Color masterbatch should bechosen pigments with high color strength and good heat resistance,andthen strengthen the blowing, and appropriately increase the water temperature.
Problem2:
The low content of titanium dioxide in the film will lead to the poor hiding power of the cast film.
Solution2:
Increasing the amount of masterbatch
Increasing the content of titanium dioxide in the masterbatch
Problem3:
Poor pigment dispersion leads to colored spots on the cast film.
Solution3:
Choosing masterbatch with good dispersibility ingredients.
Problem4:
The volatile matter in the masterbatch causes smoke during processing.
Solution4:
Reducing the extrusion temperature
Choosing high-temperature resistant masterbatch
Suzhou ANMEIMaterial Technology Co., Ltd. – the professional supplier of engineering modified plasticand the color masterbatch was founded in 2013, which is located in Tongli - the millennium ancient town, 50km far away from Shanghai, the location is very convenient for transportation.
Send product request
Other supplier products
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 15 GFStorage and Handling PRE-PROCE... | |
PA66 GF15 Heat Stabilized (A2006C, A2016C) | PA66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15Storage and Handling PRE-PROCESS... | |
Masterbatch | We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polysty... | |
ABS Engineering Plastic in Anmei | ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyac... | |
PA6 GF20 Heat Stabilized (A1006D, A1016D) for Engineering Plastics | PA6 GF 20has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always bee... |
Same products
Customized High Precision Nylon ABS PP PC PBT Automotive part Injection molding Plastic injection mold | Seller: 840661 | As a one-stop injection mold supplier,TECHMOULDcan provide you with a full range of mold manufact... | |
HIGH PRECISION PLASTIC MOLD FOR AUTOMOTIVE/MEDICAL /CONSUMER/ELECTRICAL INDUSTRIES | Seller: 840661 | TECHMOULD help our customers to take their ideas to a finished product. We not only provide mold ... | |
High precision Anti-dielectric PPS+GF30 optical fiber plastic connector adaptor mold manufacturer | Seller: 840661 | TECHMOULD help our customers to take their ideas to a finished product. We not only provide mol... | |
PMMA scrap for sale, Acrylic scrap supplier, PMMA Acrylic scrap for sale, pmma acrylic scrap supplier | Seller: Ivory Hong Recycling | At IvoryPhar Inc, we are dedicated to fostering sustainability and responsible material managemen... | |
HDPE Regrinds from Drums Blue, HMW HDPE Drum Regrind, HDPE scrap suppliers | Seller: Ivory Hong Recycling | At IvoryPhar Inc, we are dedicated to advancing sustainability and promoting responsible recyclin... |