Battery impact tester
Product introduction
The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in）
diameter rod placed in a cross position over the center of the sample. A 9.1kg or
10kg weight is dropped from a certain height （610mm or 1000mm） onto the
sample. cylinder
When the battery is subjected to impact test, its vertical axis should be parallel
to the plane and perpendicular to the vertical axis of the steel column. The most
axis of the square battery is perpendicular to the steel column, and the largest surface
is perpendicular to the impact direction. Each battery receives only one impact test.
The battery does not catch fire or explode.
Send product request
Other supplier products
 |
Electrostatic Decay Tester | Production: Electrostatic Decay Testeris professional designed to determine the attenuation of static electricity, corona discharge time, static v... |
 |
Safety shoe impact testing machine | Safety shoe impact testing machine - Other test instrument - standard Product Introduction: According to standards BS-953,1870,EN-344,ANSI-Z41,CS... |
 |
Protective Dlothing Splash Spray Liquid Thickness Tester ISO 6529-2013 BS EN 463-1995 | Standards GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against chem... |
 |
Wet microbial penetration resistance tester | Standards: YY/T 0506.6-2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment-Part... |
 |
Hydrostatic Head Test Machine | Standards: AATCC 127 Water Resistance: Hydrostatic Pressure Test ASTM F1670 Standard Test Method for Resistance of Materials Used in Protective ... |
Same products
 |
Briefly describe the importance, core functionality and how to implement a hospital clock system solution | Seller: California Triangle | In the healthcare industry, precise time synchronization is critical. Every second can be a matte... |
 |
Sand and Dust Test Chamber for Automotive Connectors | Seller: Standard International Group (HK) Limited | Operating Conditions: Ambient temperature: 5°C～+28°C (average temperature within 24 hour... |
 |
Automotive Connector SO₂/H₂S Corrosion Test Chamber | Seller: Standard International Group (HK) Limited | Standards: GB/T 10587-89. GB/T 2423.9-93: Chinese national standards for sulfur dioxide corrosio... |
 |
Automotive Connectors Salt Spray Tester | Seller: Standard International Group (HK) Limited | Applicable Standards: Neutral Salt Spray (NSS) Tests: GB/T2423.17. ISO 3768/3769/3770. ASTM B117... |
 |
Air - tightness Testing Device for Automotive Connectors | Seller: Standard International Group (HK) Limited | Main Functions: 1. Provide stable positive and negative pressures for testing the air - tightnes... |
