Jetty inflatable floating yokohama type pneumatic rubber fender
Florescence is a leading manufacturer for ISO 17357 pneumatic rubber fender/pneumatic fender/boat fenders, a leading anti-collision device for marine application in the world today. These compressed air fenders serve as protective medium against collision during ship-to-ship contact (STS) and ship-to-berthing (STB). Pneumatic fenders cn be delivered in various sizes and types. Chain and tyre net type is usually recommened to protect the fender body, but sling type or body only is also available.
Florescence Pneumatic Rubber Fender are exported to many countries like Vietnam, America, Denmark, Finland, Indonesia, Singapore, Philippines, France and more. High product quality and reasonable costing drives their adoption in the global market and are increasingly preferred as the most popular replacement to Yokohama fenders.
Pneumatic Rubber Fenders are made of an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.
1.The outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
2.The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
3.The inner rubber layer seals the pressurized air inside the fender.
4.Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.
Fender assembly for the end of metal, by inside and outside the two flanges with bolts, nut clamping, center is a valve, its structure is similar to automobile tire valve.
Advantages of pneumatic rubber fender
1 High energy absorption with a low reation
2 Heavy duty and long service life over 10 years
3 Supplied as sling type or with chain and tire net for protection of the fender body
4 Light weight, portable and floatable, can be installed and replaced easily
5 Suitable for locations with large and small tidal differences
Pneumatic rubber fender use matters needing attention
1. Pneumatic pressure control in±5% of the rated pressure
2. Test pressure normally, add pressure in a timely manner
3. Avoid contact with sharp objects
4. When Long time not need, should wash to dry, filled with right amount of compressed air, placed in a cool dry ventilated place.
5. Storage place away from heat, acid and alkali, oil and grease
6. When store, shall not be folded and piled up
Applications of Pneumatic Rubber Fender
1. Ship to ship,ship to wharf 2. Oil tankers, container vessels
3. Luxury yachts, ocean platforms 4. Larges shipyards
5. Fender system 6. Military ports ,warship
7. Larger under water foundations of bridge
Qingdao Florescence Rubber Products Co.,Ltdis a comprehensive marine supply enterprise, intergrating the scientific research design, product development with technical services. We specialize in manufacturing pneumatic rubber fenders, foam fenders, various marine rubber fenders and ship lauching & salvage rubber airbags. FLORESCENCE products are designed, manufactured, and tested per ISO 17357 and ISO 9001:2002. And every unit is producted strictly according to the requirements of ship surveyors such as BV, CCS, etc.
Located in the Port of Qingdao FLORESCENCE can respond effectively to any urgent requirements of fenders and airbags with its comprehensive range of products.
Florescence has our own factory which manufacture rubber products for around 20 years, so we are the factory direct seller, we are more professional than other companies. FLORESCENCE Ship Salvage Fenders are exported to lots of countries, including Indonesia, Singapore, Kenya, Tanzania, etc. FlorescenceRuber Fender can be manufatured in various sizes and types according to the clients' requirements.
Send product request
Other supplier products
Dia0.5m L1.0m different colors foam filled fender for ship to ship | Dia0.5m L1.0m different colors foam filled fender for ship to ship Foam filled fender is a kind of constructive fender with polyurea m... | |
Ship/boat/vessel Inflatable Marine Natural Rubber Air Bag | Marine air bag 4 layers marine air bag 6 layers marine air bag 8layers marine air bag ... | |
Dock used marine cylindrical rubber fender | 1.Description ofDock used marine cylindrical rubber fender Cylindrical rubber fender has low reaction forces, little surface preeure a... | |
Heavy duty boat ship moving airbag for lifting salvage | Ship moving airbag Advantages of ship moving airbag 1.Qingdao Florescence specializes in the production of ship moving airbag sin... | |
Ship operation for dock berthing and mooring | Ship operation for dock berthing and mooring Marine floating fender which is made of synthetic-cord-reinforced rubber sheet with compressed ... |
Same products
shipbuilding equipment 3D localizer | Seller: 837294 | Beijing CSTS Technology Co.,Ltd. is a professional import and export enterprise in China. mainly ... | |
Best Selling Products 2020 In Europe Amazon Freight Forwarder Logistic Fba Freight Shipping Cost China | Seller: Haoocean International Logistics(Shanghai)Co.,Ltd. | shipping | |
0210.29.030-1,CS35 ,C572,EZ13.1A,MC307.85,0210.29.030-1 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Our factory produce nozzle, plunger,injector,valve,etc,which used for the agricultural machinery ... | |
5×0,3×130,5×0,35×130,5×0,5×140,5×0,75×140,6×0,3×130,6×0,45×140 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Contact person : Yolanda Mobile & 5×0.3×130,5×0.35×130,5×0.5&... | |
Marine nozzle8x0,42x150 : 6CH 31/36 (D67) 6×0.3×130 | Seller: Sihong Tangni Engine Parts Co., Ltd. | Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult... |