Drill Pipe Magnetic Flux Leakage Detector MFL-308
Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so
Detection speed: 6-20 m / min
Acceptance criteria: American Petroleum Institute API testing standards
The main MFI magnetic flux leakage inspectionmethod principle is that the workpiece is magnetized (close to saturation) to have a certain magnetic flux density to generate a leakage magnetic field at the discontinuity, and the magnetic field sensor sends the output signal to the operational amplifier.
Due to the magnetic saturation state, the workpiece has a relatively high magnetic field strength and magnetic field density, and the magnetic lines of force are not limited so that the surface of the workpiece has a large magnetic leakage, which is favorable for on-site detection.
The magnetic sensitive sensor scans along the surface of the magnetized ferromagnetic material, pick up the defect leakage magnetic field and forms a defect electrical signal to achieve the purpose of finding the defect position and parameters.
Magnetic flux leakage non-destructive inspection technology is widely used in the detection of metal materials and the evaluation of related products due to its fast detection speed, high reliability and low surface cleanliness. Different from magnetic particle detection and detection, the signal in magnetic flux leakage detection is not displayed by magnetic powder, and it has no pollution to the environment: due to various sensitive components (such as Hall element and coil method), the detection result is directly output by electric signal, which is easy to connect with computer to realize digital Processing, so the detection results can be stored and reproduced, facilitating the analysis of the detection signal and the trend analysis of the detection results.
Drill Pipe Magnetic Flux Leakage Detector MFL-308 Performance
|
Drill pipe inspection method |
Drill pipe straight ahead, test assembly fixed |
|
Detection range |
F60-F168drill pipe |
|
transport system speed |
6-20m/min；variable frequency range |
|
Testing methods |
Automatic charging, Automatic testing, Automatic sorting |
|
The sensitivity of hole detection |
|
|
Accuracy of section area measurement |
2-4％ |
|
Position resolution accuracy |
20mm |
|
Non-detection zone |
£100mm（drill pipe body） |
|
False alarm rate |
£0.5% |
|
Remaining magnetism after demagnetization |
£10GS |
|
The internal and external surface coverage |
100% |
|
Equipment usage environment |
Working temperature:40°-minus50°; Working humidity：0-95%; |
BKN is a professuonal mfl suppliers, we provide ndt device, magnetic flux inspection, mfl sensor, magnetic pipeline inspection services,eddy current testing, etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
LGET-553 Aluminum Tube Eddy Current Flaw Detector | LGET-553 Aluminum Tube Eddy Current Flaw Detector Brief Introduction The aluminum tube is a type of non-ferrous metal which may have one or more... |
 |
Eddy Current Testing Equipment | ECT Eddy current testing used by eddy current testing machine is a non-contact testing method, which mainly uses the electromagnetic field and elec... |
 |
Eddy Current Testing Equipment | ECT Eddy current testingis a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals t... |
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leakage is a magnetic method of nond... |
|
|
Drill Pipe Magnetic Flux Leakage Detector MFL-308 | Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so Detection speed: 6-20 m / min Acceptance criteria: American Petroleum Institute ... |
