Full automatic ZM-R6823 BGA rework station for computer motherboard chips repair
ZM-R6823 full automatic BGA rework station for computer motherboard chips repair
It's apply to desolder, solder, remove and replace BGA chips of computer, moible and play stations repair.
Features:
3 independent control heaters
Precise optical alignment system
Adopt adjustable CCD color optical system, with a beam split, zoom in, zoom out and micro-adjust functions, has automatic chromatism resolution and brightness adjustment system, can adjust the clearness of the image,
With 15” HD monitor. High automatic can avoid human error; can repair the lead-free socket 775 and double deck BGA chipset very well. It is good for lead-free repairing.
Multi-function operation system
1,.Adopt high definition human-machine interface, available for setting set up and operation to avoid error settings, the top heater device and mounting head 2 in1 design, lead-screw drive, Z axis controlled by Panasonic servo control system, can control the positioning precisely.
- 3℃.Heating temperature, time, slope, cooling and alarming, all will be shown on the touch screen.
- 0.01MM. with”+” infrared laser light for fast positioning, after positioning, it is locked automatically.
Mounting and de-mounting chips automatically.
- Sizes of BGA repair.
Superior safety functions
- With CE certification, emergency button and abnormal incident power off automatically protect device, with protective screening, to protect the operator and the spare parts from damage. After de-soldering and soldering,
- There is alarming. When temperature goes out of control, the circuit will automatically power off. It is of double over temperature protection function. Temperature parameter has a password to avoid from arbitrary changes,
with superior safety protection functions, can protect PCB board components and the machine from damage at any abnormal situation.
Specifications and technical parameters:
Power: AC 380V 50/60Hz
Total Power: Max 6800W
Heater power: Top heater 800W, bottom 800W, IR 5000W
Electrical materials: Servo Drive system (Panasonic) +Panasonic PLC+8”Touch screen
Temperature control: K-type (Closed Loop)
Positioning: V-groove, PCB support + laser automatic positioning
PCB size for: Max 470×550mm Min 15×20 mm
BGA chip for: Max 80×80mm Min 2×2 mm
Dimensions: L890×W790×H1000mm
Sensors: 4
Weight: 140kg
Send product request
Other supplier products
 |
ZM-R5860C high efficient-cost BGA rework station for laptop chips repair | ZM-R5860C BGA rework station It could remove and replace BGA Chips of laptop, xbox360 and mobile etc. 1, Main Feature , Y, Z axis all can do hi... |
 |
Repair mobile phone chips machine ZM-R6200 BGA Rework station with optical alignment vision system | ZM-R6200 BGA rework station It is used to desolder and solder BGA Chips of computer, especially for mobile chips rework. Samsung order 60 sets fo... |
|
|
Full automatic ZM-R6823 BGA rework station for computer motherboard chips repair | ZM-R6823 full automatic BGA rework station for computer motherboard chips repair It's apply to desolder, solder, remove and replace BGA chips of co... |
Same products
 |
Digital rail wear gauge | Seller: 842518 | LJ-GM series digital rail wear measuring ruler is used to measure the vertical wear and lateral w... |
 |
Digital Switch Rail Lateral Wear Measuring Gauge | Seller: 842518 | The point rail is an important part of the switch. The train is guided to the main line or the si... |
 |
Digital sliding rail wear gauge | Seller: 842518 | LJ-HGM series sliding rail wear measuring ruler is used to measure the vertical wear value, side ... |
 |
Digital rail vertical frog wear gauge | Seller: 842518 | LJ-ZC-A rail frog wear measuring ruler mainly uses the unworn surface of the wing rails on both s... |
 |
Point Rails Lowering Value Measuring Ruler | Seller: 842518 | The frog vertical wear measuring ruler is used to measure the vertical wear value at any part of ... |
