Wireless Transmission Pipe Ultrasonic Flaw Detector
The ultrasonic pipe testing equipmentsystem is suitable for the automatic detection of various internal and external defects of steel pipes. The principle of ultrasonic flaw detection is that after the ultrasonic wave is coupled into the steel pipe through water, the incident propagation will cause ultrasonic reflection when there is a defect in the pipe. The ultrasonic instrument will alarm the ultrasonic reflected signal after realizing the signal to realize the automatic detection of the defect; Transmission ultrasonic pipe testing equipmentis currently the advanced detection equipment in China.
Wireless Transmission Pipe Ultrasonic Flaw Detector Introduction
Rotating probe configuration
A total of 3 probe adjustment frames are placed on section 1 at 120°apart. Each of the adjustment frames is equipped with a 2-channel combined ultrasonic line focusing longitudinal probe to detect longitudinal defects of the steel tube in a clockwise direction.
Detection of defects: Vertical and vertical defects in the steel pipe are detected in a clockwise direction.
Center frequency: 5.0MHz±10%
Coupling method: water immersion method
Quantity: 3 sets of probes, each consisting of 2 wafers. These 3 sets of probes are evenly distributed in the circumferential direction of the workpiece, spaced 120° apart, on the same section. A total of 6 channels of water immersion probes.
A total 3 probe adjustment frames are placed on section2, separated by120°, and a 2-channel combined ultrasonic line focusing longitudinal probe is arranged on each adjustment frame to detect longitudinal defects of the steel pipe counterclockwise.
Detection of defects: counter-clockwise detection of longitudinal defects inside and outside the steel pipe.
the center frequency: 5.0MHz ± 10%
coupling method: water immersion method
Quantity: 3 sets of probes, each consisting of 2 wafers. These 2 sets of probes are evenly distributed in the circumferential direction of the workpiece, spaced 120° apart, on the same section. A total of 6 channels of water immersion probes.
Defect detection standard
Inspection of Longitudinal and Transverse Defects in Ultrasound Steel Pipe: GB/T5777-2008 L2(C5) Standard
Wireless Transmission Pipe Ultrasonic Flaw Detector Performance
|
Number of channels |
12channels |
|
Flaw detection speed |
40m/min |
|
Total gain |
100dB，step 0.5dB |
|
Working mode |
Single probe transmitting, receiving or dual probe transmitting and receiving separately |
|
Sensitivity margin |
≥50dB |
|
resolution |
≥26dB |
|
Dynamic range |
≥30dB |
|
Scanning range |
0～5000mm |
|
Frequency range |
|
|
Sampling range |
250MHz |
|
Repeat frequency |
Signal channel100Hz～4KHzadjustable |
|
Vertical linearity |
≤2% |
|
Horizontal linearity |
≤1% |
|
Detection method |
Full-wave, positive half-wave , negative half-wave |
|
Gate setting |
3 gates per channel, A and B are defect gates, and c is an Interface tracking gate |
|
Alarm indication |
Alarm color display and audible alarm for each channel A, B, C |
|
Delay alarm |
Two ways, Delay time0.1～10S, step 0.1Swaveform storage, the unlimited number for waveform playback, printing and report generation |
We are one of the best ultrasonic testing equipment suppliersand ultrasonic flaw detector manufacturers,we provide ultrasonic pipe inspection equipment,ut pipe testing,ultrasonic flaw detector machine,ultrasonic flaw detector probe,ndt testing machineand ndt testing,RFQ today.
Send product request
Other supplier products
 |
Bolt Vortex Sorter BKNFX-11 | Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external ... |
 |
Magnetic Flux Leakage Testing Equipment | What Is Magnetic Flux Leakage Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leaka... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossle... |
 |
LGET-553 Aluminum Tube Eddy Current Flaw Detector | LGET-553 Aluminum Tube Eddy Current Flaw Detector Brief Introduction The aluminum tube is a type of non-ferrous metal which may have one or more... |
 |
EDM Notch 1024 | An electric pulse is a pulse generated by electrons, and a pulse is a process of changing a voltage in a short time. Electropulsing is an unsteady ... |
Same products
 |
Wax injection | Seller: Yihui casting Technology Co., Ltd. | Wax injection This category mainly includes the MAXWAX brand wax injection machinesdeveloped and... |
 |
Moulding tools | Seller: Yihui casting Technology Co., Ltd. | Moulding tools Casting supplies a complete range of jewellery moulding tools designed for profes... |
 |
Moulding machines | Seller: Yihui casting Technology Co., Ltd. | Moulding machines YihuiCasting provides advanced mold making equipments for jewelry designed for... |
 |
3D printer | Seller: Yihui casting Technology Co., Ltd. | 3D printer YihuiCasting provides advanced 3d jewelry printers designed for modern jewelry produc... |
 |
3D Design | Seller: Yihui casting Technology Co., Ltd. | 3D Design This category includes all 3D printers and relevant spare parts like release films, re... |
