Stainless Steel Stamping
Stainless steel stampingis the process of stainless steel material processed by using the mold, which makes its deformation or fracture has a certain shape and size.
Orienson's stainless steel metal stamping
Metal stamps for stainless steelpossesses good mechanical performance as well as high hardness, good wear-resisting performance, corrosion resistance, high temperature resistant, and so on. Under the harsh environment, stainless steel is more resistant to corrosion than other materials, also with longer service life, and is widely applied in various fields.
Common Stainless Steel Standard Steel Comparison Table
|
China |
Japan |
America |
EU |
|
GB/T20878 |
JIS |
ASTM |
BSEN |
|
12Cr13 |
SUS403 |
403 |
— |
|
20Cr13 |
SUS420J1 |
420 |
|
|
30Cr13 |
SUS420J2 |
— |
|
|
10Cr17 |
SUS430 |
430 |
|
|
68Cr17 |
SUS440A |
440A |
— |
|
06Cr19Ni10 |
SUS304 |
304 |
|
|
022Cr19Ni10 |
SUS304L |
304L |
|
|
06Cr17Ni12Mo2 |
SUS316 |
316 |
|
|
022Cr17Ni12Mo2 |
SUS316L |
316L |
|
|
06Cr18Ni11Ti |
SUS321 |
321 |
|
|
06Cr18Ni11Nb |
SUS347 |
347 |
What Are Problems We Need To Pay Attention To When Design Stainless Steel Stamping Parts
Understanding the characteristics and processing characteristics of stainless steel material is the key factor to ensure the quality of stainless steel stamping kit, the hardness and strength of stainless steel material are relatively high, we should pay attention to the following problems when design:
Metal materials will rebound after stamping molding, due to the high hardness of stainless steel, the material rebound is larger. In the design of the molding mold, it is necessary to predict the amount of material rebound and minimize the size problems caused by material rebound.
Much stainless steel stamping and drawing parts will be required higher hardness, but because the harder the material is, the more difficult it is to stretch, sometimes it is necessary to reheat after molding to achieve hardness requirements, but the workpiece after heat treatment is prone to deformation, and the deformation should be taken into account in mold design.
The hardness of stainless steel is high, the loss of the die blade will be relatively large, so when choosing a tool, you need to make the appropriate choice according to the hardness of stainless steel material.
As one of the most professional metal stamping manufacturer, we provide metalwork and stamping, stamped aluminum panels, simple press tool, single station press, deep drawingand etc. Want to know more, contact us.
在线联系供应商
Other supplier products
 |
Electrical And Electronic Accessory Metal Stamping | Orienson has been trusted by the top international brands for our high-quality standard and innovative solutions, and have expanded to cover Low vo... |
 |
Deep Drawing Parts | Deep drawing molding is a stamping processing method that uses the die to shape the flat blank into an open hollow part. Orienson's Deep Drawing P... |
 |
Steel Stamping | Steel stampingmaterials are mainly hot rolling and cold rolling steel plates and steel bands. Orienson's Steel Stamping Steel stamping material... |
 |
Progressive Die | Progressive die(also known as continuous die) is referred to the punch in a stroke, in a few different positions, at the same time to complete the ... |
 |
Aluminum Stamping | Aluminum alloy stamping refers to stamping hardware made of aluminum alloy. Orienson's Aluminum Stamping Aluminum alloy is the most widely used n... |
Same products
 |
MONSA® DDAC-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture... |
 |
MONSA® DCA-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp... |
 |
MONSA® CTAC-50 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ... |
 |
MONSA® CTAC-30 | 卖方: Guangzhou Monsa Chemical Co., Ltd | INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly... |
 |
共轨喷油器 | 卖方: 德艾普(厦门)进出口有限公司 | 商品名称：柴油喷油器型号： 最小起订量：1 件 材质：钢 包装详情：纸箱包装 库存：有库存 品牌：CNDIP 质保：6个月 |
