Coil Marking Robot
Coil Marking Robot
The SINOM Coil Robot Marker is designed to mark OCR and 2D data-matrix codes directly on the surface of the hot or cold coils (temperature up to 1,100ºC).
This marking solution is based on a 6-axis robot that uses from one to 7 nozzle marking heads. The robot is fully integrated in the factory’s automation and works unattended except for programmed maintenance or specific manual tasks, reducing traceability mistakes. The high quality and consistency of the mark makes it possible to use machine vision systems for automatic data capturing and traceability. The vision system can be used in addition to detect coil winding defects, such as non-round ID, oscillation or telescopic winding.
Marking Robot
- 6 axis Robot
- Free Programming
- Non-toxic, Blockless
- Easy Installation, Widely applicable
- Low Maintenance Cost
Measuring Time: 16 seconds
Character Spraying Span: 1 second/Character
Strip Coil OD: 2800 mm max.
Strip Coil Width: 2200 mm max
Total Weight: 3800 kg
Contact informaiton:
Tel:
Mobile:
Web:
在线联系供应商
Other supplier products
 |
Used hot rebar Rolling Mill Equipment and Machine | Used hot rebar Rolling Mill Equipment and Machine Used Rolling Mill Equipment and Machine Used and reconditioned rolling mills, like flat wire rol... |
 |
Water Boxes in a bar or wire rod mill | Water Boxes in a bar or wire rod mill Water Boxes in a Bar or Wire Rod Mill Morgan Water Boxes can be installed at various locations in a bar or w... |
 |
back up roll for hot and cold rolling mill | Productionofforgedsteelbackuprollsrangingfrom5to170tonnesfinished weightLeadingsupplierofrollsforuseinferrousandnonferrousapplications;bothhotandc... |
 |
coil handling system makes efficient coil transportation for rolling mill | coil handling system makes efficient coil transportation for rolling mill Coil Handling System VERSATILE HANDLING SOLUTIONS The finishing end of h... |
 |
hot narrow strip rolling mill production line | Steel-rolling Engineering Division is SINOM’s main technology engineering force. Steel-rolling Engineering Division has held good command of ... |
Same products
 |
尖心轨降低值测量尺 | 卖方: 842518 | 辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |
 |
便携式激光弦线 | 卖方: 842518 | 激光准直仪用于测量轨道水平和线路，以辅助轨道测量和人工捣固作业。它可以测量水平和垂直。它主要由激光发射装置、靶标定位装置和移动定位靶标装置组成。 |
 |
轨底坡测量装置 | 卖方: 842518 | Основная часть катания колеса имеет наклон внутрь 1:40. Для того чтобы верхняя часть рельсового п... |
 |
NGM-6.3II型内燃钢轨打磨机 | 卖方: 842518 | 该机主要用于铁路钢轨维护施工中的焊缝恢复打磨、压延毛刺、轨面修复、波形磨损等。该机不仅仿形精度、打磨效率等技术性能有较大提高，而且由于数控进给单元的开发应用，实现了砂轮进给的智能控制，大大简化了... |
 |
NCM-5.1型内燃道岔打磨机 | 卖方: 842518 | NCM-5.1道岔打磨机是专门针对道岔、交叉口及轨头两侧的打磨作业而设计的。该机打磨装置可从垂直方向向左右倾斜30°，并可沿纵横方向调整打磨轮的位置，使该机打磨装置在钢轨间狭小空间内也能... |
