Voc tail gas treatment equipment For Lost Foam Casting
Voc tail gas treatment equipment For Lost Foam Casting
TheVOC Exhaust Gas Treatment SystemforLost Foam Castingis a high-efficiency solution designed to manage volatile organic compounds generated during lost foam casting processes. Engineered for industrial foundries, this system effectively reduces VOC emissions, ensuring compliance with environmental regulations while maintaining a safe and clean working environment.
Processing air volume: 10000/20000/30000m ³/ h;
Combined system of adsorption concentration desorption and catalytic combustion equipment: 1 adsorption bed; Carbon consumption: 1.5 cubic meters;
Activated carbon adsorption bed: The main material is Q235, made of 1.5 thick steel plate, and the inner plate is 1.2 galvanized plate, containing 5cm silicate rock insulation;
CO catalytic combustion furnace: The main material of the shell is Q235, with a thickness of 2.0 and 8 inner plates. It is filled with 10CM silicate rock for insulation treatment. The heating tube fins are made of 304 stainless steel, with 30 heating tubes and a total power of 60KW. Plate heat exchanger;
Main air centrifugal fan with frequency conversion: 4-72-6C-15KW, including 15KW frequency converter;
Desorption centrifugal fan: 9-19-4C 2.2KW;
Electric control system: intelligent touch screen PLC automatic control.
Main functions and advantages
Activated carbon adsorption system: The exhaust gas enters the activated carbon adsorber for adsorption, and after passing through the adsorber, it is discharged into clean air that meets the emission standards.
Desorption system: When the adsorber is saturated, it will enter a desorption state and use hot air to desorb the organic solvents in the adsorber, discharging high concentration waste gas into the CO device.
Catalytic combustion system: High concentration organic waste gas is first heated up to the CO starting temperature through a heat exchanger. If the temperature cannot be reached, the electric heating method is turned on to raise the temperature to the starting temperature. After the waste gas enters the catalytic combustion chamber, it starts combustion and purification on the catalyst. The temperature of the emitted flue gas can reach 400-500 ℃. When the concentration of organic waste gas reaches a certain level, it can maintain spontaneous combustion in the catalytic bed without external heating, At this point, the electric heating can be stopped.
The flue gas after combustion is preheated by a heat exchanger and enters the catalytic bed for combustion. The cooled flue gas is then exchanged with fresh air to control the temperature of the desorbed gas at around 120 ℃, and then discharged into the chimney through the exhaust valve. After desorption, proceed to the next cycle.
More:
在线联系供应商
Other supplier products
|
|
Voc tail gas treatment equipment For Lost Foam Casting | Voc tail gas treatment equipment For Lost Foam Casting TheVOC Exhaust Gas Treatment SystemforLost Foam Castingis a high-efficiency solution design... |
 |
Airbag 3D vibration table | Airbag 3D vibration table (molding) The3D Vibration Tablefor Lost Foam Castingis designed forsand compaction and mold stabilizationduring the mold... |
 |
Bottom-turning hydraulic box turner machine | Bottom-turning hydraulic box turner machine The hydraulic box flipping machine mainly consists of a flipping body, a base, a hydraulic cylinder, a... |
|
|
Air-Cooled Water-Cooled Drum Cooler Machine | Air-Cooled Water-Cooled Drum Cooler Machine TheFoundry Sand Drum Coolerby Guoning is a high-performance cooling solution designed for sand treatme... |
 |
Water ring sand temperature cooler | Water ring sand temperature cooler Main technical parameters Size: φ2000/φ2500/φ2900×8900; Material: 6mm steel plate welded to... |
Same products
 |
Servo-Driven Automatic Shearing Machine for Blanks | 卖方: AI-Machine(Shandong)Industry Technology Co.，LTD | Servo-Driven Automatic Shearing Machine for Blanks The Automatic Shearing Machine is the preci... |
 |
Steel Coil Precision Straightener /Leveling Machine | 卖方: AI-Machine(Shandong)Industry Technology Co.，LTD | Steel Coil Precision Straightener /Leveling Machine Steel Coil Precision Straightener for Drum L... |
 |
Hydraulic Coil Decoiler / Uncoiler | 卖方: AI-Machine(Shandong)Industry Technology Co.，LTD | Hydraulic Coil Decoiler / Uncoiler The ANTE10 ton hydraulic coil decoiler is a powered steel c... |
 |
Servo-Driven Drum Transfer Conveyor (Chain Type) | 卖方: AI-Machine(Shandong)Industry Technology Co.，LTD | The servo-driven drum transfer conveyoris designed for indexed transportation of steel drum bodie... |
 |
Automatic Drum Leakage Checking Machine (Standard Drum) | 卖方: AI-Machine(Shandong)Industry Technology Co.，LTD | Automatic Drum Leakage Checking Machine (Standard Drum) The Automatic Drum Leak Testeris the e... |
