ECT For Automotive And Aerosapce
NDT Application in Automotive Industry:
Eddy current testing NDT echnology has been widely used in the detection of metal components in the automotive and aerospace industry. In order to ensure the flight safety of the aircraft, the relevant components must be periodically inspected. The eddy current technology is usually used to detect aero-engine blade cracks, bolts, cracks in the screw holes, multi-layer structure of the aircraft, landing gear, wheels and aluminum skin as the main NDT non destructive testing methods. And subsurface defects, and used to detect defects in the wing joint weld. In the detection, it can effectively suppress the shaking of the probe, and the material is uneven and cause interference signals. Metal magnetic memory testing technology can be used to diagnose the stress concentration of the above components or early damage.
Due to the complex geometry of the auto parts, the equipment is required to have a high level of materials and complicated materials, requiring diverse equipment and high precision. In addition, the production of auto parts is a large industrial production, with certain beat monitoring requirements, and only by reducing the testing costs, can we reduce the automobile production and improve the competitiveness in the domestic and foreign markets. With the development of the national economy, the automobile industry has become a pillar industry in China. Therefore, non-destructive testing technology for eddy current flaw detectors for automotive parts is also receiving increasing attention from manufacturers and researchers. At present, the most widely used non-destructive testing method in the detection of automotive parts is the eddy current hardness testing ultrasonic testing method. In the ultrasonic flaw detection of eddy current flaw detectors at home and abroad, the most used type A ultrasonic flaw detector. It adopts A-type ultrasonic display, which has the advantages of simple and cheap equipment, can locate and quantify defects, and is widely used in production inspection.
However, its flaw detection results are not intuitive, no record, difficult to detect, and many human factors. Seriously affect the reliability of detection. Due to the continuous development of computer technology and electronic devices, the digital acquisition and analysis of the ultrasonic signal of the eddy current flaw detector become possible, the waveform can be recorded and preserved, and the ultrasonic detection of the eddy current flaw detector is positive digital signal processing and imaging direction development. Super-generation image technology is a remarkable new technology. The ultrasonic image of the object can provide intuitively and a large amount of information, directly reflecting the acoustic and mechanical properties of the object, and can also evaluate the mechanical properties of the microstructure of the solid material. Suddenly macroscopic discontinuities.
In short, the NDT non-destructive testing method for automotive parts eddy current flaw detector will develop with the advancement of modern high-tech, to the direction of intelligence, automation and imaging, in order to adapt to the rapid development of modern automobile manufacturing industrial parts quality inspection, testing requirements.
As a et testing ndt equipment manufacturer and supplier, we have been committed to developing and manufacturing high-quality and high-performance NDT equipment to provide customers with the best quality service.
Why BKN NDT Testing Equipment
The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech mfl suppliers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.
在线联系供应商
Other supplier products
 |
Eddy Current Testing for Auto Parts | NDTApplication: Eddy current hardness testingtechnology has been widely used in the detection of metal components in the automotive The eddy cur... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. A... |
 |
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator | Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ... |
 |
Portable Magnetic Flux Leakage Testing Equipment | Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects... |
 |
Wireless Transmission Pipe Ultrasonic Flaw Detector | The ultrasonic pipe testing equipmentsystem is suitable for the automatic detection of various internal and external defects of steel pipes. The pr... |
Same products
 |
iX361 中框校正夹 | 卖方: 深圳维客修有限公司 | Fixes iCF6/iA3/iX16/iX361手机屏幕中框维修治具。iFixes iCF6免加热开屏器用于手机液晶拆解无需加热。iFixes iX361中框矫正维修平台。iFixes IA3... |
 |
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
|
|
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
|
|
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
 |
数字轨距 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 数显轨头磨损仪主要用于测量钢轨的垂直磨损和横向磨损，设计合理，重量轻，操作方便，读数直观。 特征 1.数字直读式：LCD显示屏，清晰易读;无需计算，直接读数;读数时，按住... |
