PA66 GF45 (A2011I)
PA66 GF45is a 45% glass fiber reinforced polyamide 6.6 with high stiffness and strength.
Typical Application of PA66 GF45(A2011I)
PA66 45%GF HB grade is applied to the gear field, it requires high strength, high toughness and dynamic balance and applied to the field of sports equipment and electrical tools, it requires high toughness, low temperature resistance, and low cost. Commonly used as mechanical housing.
Processing Detail of PA66 GF45 (A2011I)
Other Details of PA66 GF45 (A2011I)
Physical Property
|
Ash |
(45.0% 1 ISO3451/1) |
|
Conditioned |
600°C*2h |
|
Density |
(1495Kg/m3 1 ISO1183) |
|
Conditioned |
23°C |
|
Shrinkage Parallel Flow |
(0.1-0.3% 1 ISO294-4) |
|
Shrinkage Vertical Flow |
(0.4-0.6% I ISO294-4) |
Mechanical Properties
|
Tensile strength (204.0MPa 1 ISO527) Conditioned |
5mm/ min |
|
Tensile Strain at Break (2.8% I ISO527) Conditioned |
5mm/min |
|
Notched Impact Strength (16.5 KJ/m2 IISO179) Conditioned |
|
|
Flexural Strength (332MPa 1ISO178) Conditioned |
2mm/min |
|
Flexural Modulus (13547 MPa I ISO178) Conditioned |
2mm/min |
Thermal Property
|
Melting Point |
(260°C I ISO11357) |
|
Hot Deformation Temperature |
(258*C I ISO75) |
|
Conditioned |
|
|
Flammability Class |
(HB 1UL94) |
|
Conditioned |
mm |
Injection Molding Conditions
|
Drying Temperature |
130°C |
|
Drying Time |
3h |
|
Cylinder Temperature |
290-310°C |
|
Nozzle Temperature |
290-310*C |
|
Tooling Temperature |
80-100*C |
* Molding conditions arejustfor reference, please make an adjustment based on the actual situation！
As a professional engineering plastic company, Anmei provide pa material, pa4 6 gf30, heat stabilized nylon and etc. Want to know more? Contact us.
在线联系供应商
Other supplier products
 |
PA66 GF50(A2011J) for Engineering Plastics | PA66GF50is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing... |
 |
PA66 GF20 Halogenated FR (A2014D, A2114D) for Engineering Plastics | Nylon 66, filled with 20% of glass fiber and flame resistance halogens, are extruded by Coperion twin-screw extruder is PA66 GF20 halogenated FR ... |
 |
PA66 GF15 With High Tensile Strength (A2307C, A2317C) for Engineering Plastics | PA66GF15is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15With High Tensile St... |
 |
PA6 GF30 Halogenated FR (A1014F) for Engineering Plastics | PA6 GF30 FRis a PA6 with 30% glass-fibers and halogens flame retardant. PA 6 GF30Halogenated FR Features Glass fiber reinforced 30% ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | PA66 GF15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESS... |
Same products
 |
Two-Shot Injection Molds | 卖方: WIT MOLD LIMITED | Two-Shot Injection Molds Advantages of two-shot injection molding The benefits of Double Inject... |
 |
precision injection molding | 卖方: WIT MOLD LIMITED | precision injection molding Precision injection moldingis a method demanding unparalleled accura... |
 |
Custom Plastic Molds molding | 卖方: WIT MOLD LIMITED | Custom Plastic Molds molding Plastic Molds molding servicesprovide many extremely versatile part... |
 |
Negative Pressure Physiotherapy Tank Molds | 卖方: Zhuozhou Yihua Mould Factory | The negative pressure tank is a disposable consumable for male negative pressure treatment. This ... |
 |
PLC Casing Molds | 卖方: Zhuozhou Yihua Mould Factory | The PLC housingbelongs to a kind of rail electrical module. It not only needs to achieve the fit ... |
