.

Squeeze Die Casting

The squeeze die casting, also called extrusion casting or liquid die forging, is a kind of newly developed metal forming technic that combines the casting process and dies forging method.

The basic principle of squeezing die castingis to fill the liquid metal into the pre-lubricated mold cavity, then give sustained pressure to the metal, thus forming the solidifying hard shell. The metal crystallization and solidification process are conducted under the pressure, so the defects such as shrinkage and porosity are greatly diminished. An almost defects-all-free product could be achieved by this technic.

Squeeze Die Casting Types

There are 2 subdivisions of indirect squeeze casting: direct squeeze die casting and indirect squeeze die casting. The formal technic is to give the pressure directly on the surface of liquid metal, while the last technic is to pressure the liquid maintaining in the gating part of the casting mold. Usually, the direct squeeze castinghas a better-resulted product than the indirect squeeze die casting.

What Is Squeeze Die Casting?What Are Its Advantages?

Squeeze casting aluminumis a process method to obtain castings (or ingots) by applying high mechanical pressure to liquid (or semi-solid) metals and metal matrix composites that enter the casting mold at a low speed so that they can be formed and solidified under pressure. Squeezing die casting is the product of the combination of casting and forging, which is a process between casting and forging. Squeeze die casting is close to forging in terms of performance.

The squeeze die casting process method can cast more complex pieces than forged parts. Due to the pressure molding, compared with other casting methods, the density of squeezing die casting is higher. Compared with forging, the price is relatively low because the mold is formed once. Due to the solidification under pressure, there are fewer internal defects, close to the forging organization, so the squeeze die casting parts can be heat treated.

Squeeze Die Casting Used For In Automobile Parts

At present, die-casting is a more mature process method, which is relatively cheaper. First of all, a large number of applications in engine pressure casting. Compared with sand casting, squeeze die casting has the advantages of fast and high precision.

In terms of strength, squeezing die casting also can meet the requirements. However, the surrounding bearing parts have a tendency to use pressurized casting.

Squeeze die casting could achieve vertical filling. High-pressure aluminum alloy liquid enters the mold cavity from the bottom upwards. The gate area is larger and the speed is slower, thus the gas can be exhausted from the exhaust tank. Squeezing die casting is suitable for making wall thickness parts. Most automotive parts can be made by squeeze die casting, but it is not advantageous for thin-walled parts. With the increasing call for lighter cars and lighter cars requiring more and more, squeeze die casting is a technology with greater prospects.

For more informationabout advantages of squeeze casting, please feel free to contact us!



在线联系供应商

至: Shanxi Rayforce Manufacture Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Squeeze Die Casting
Squeeze Die Casting The squeeze die casting, also called extrusion casting or liquid die forging, is a kind of newly developed metal forming technic that combines the ...
Vacuum Investment Casting
Vacuum Investment Casting Vacuum investment casting is one of the precision investment casting methods. This special technic is mainly applying to producing the small but hi...
Resin Sand Casting
Resin Sand Casting Resin sand castingis a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and so...
Silica Sol Investment Casting
Silica Sol Investment Casting The silica sol also shares the name of water glass in general. It is used in the metal casting process as mold adhesive which is mixed with sand an...
Lost Wax Investment Casting
Lost Wax Investment Casting Lost Wax Investment Casting The lost wax casting aluminumprocess can differ depending on the application and the requirement, but it generally con...
供应产品

Same products

Room Temperature Vulcanized Silicone Rubber
Room Temperature Vulcanized Silicone Rubber 卖方: Zhongtian East Fluorine Silicon Material Co., Ltd Product Name: room temperature vulcanizing silicone(Methyl RTV 107/OH Polymer) Molecular Formu...
Polydimethylsiloxane
Polydimethylsiloxane 卖方: Zhongtian East Fluorine Silicon Material Co., Ltd Name: Hydroxy Terminated Polydimethylsiloxane(Methyl Silicone Oil) Melt Point (℃): -59 Spon...
Octamethylcyclotetrasiloxane (D4)
Octamethylcyclotetrasiloxane (D4) 卖方: Zhongtian East Fluorine Silicon Material Co., Ltd Product Name: D4 Silicone Octamethylcyclotetrasiloxane Molecular Formula: (CH3 ) 8 Si4 O4 O...
Mixing Silicone Rubber
Mixing Silicone Rubber 卖方: Zhongtian East Fluorine Silicon Material Co., Ltd Mixing Silicone Rubber Usage: it can be used for pressing buttons, o-ring, sealing gasket, sha...
Methyl Vinyl Silicone Rubber
Methyl Vinyl Silicone Rubber 卖方: Zhongtian East Fluorine Silicon Material Co., Ltd Name: Methyl Vinyl Silicone Rubber Feature: High temperature resistant Appearance: ...