Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
FEATURES OF GOLOHO-4313-AB
Flammability,UL-94V0 certification
Excellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivity
Mix ratio 1:1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module.
Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within.
GOLOHO-4313(W)-AB is a2 part silicone adhesiveparticularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .
HOW TO USE GOLOHO-4313-AB
Stirred thoroughly before mixing
Mixed in 1:1 ratio by weight
Agitation: mixed thoroughly by low speed agitation
Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam.
Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally
Curing 1:curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat
Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70℃ for 20 minutes
TECHNICAL DATA OF GOLOHO-4313-AB
|
Model |
GOLOHO-4302W (G) -AB |
|
|
Uncured |
A |
B |
|
Appearance |
White(grey), Flowing |
White flowing White, Flowing |
|
g/cm3Density |
||
|
Viscosity cP |
4000±500 (25°C) |
4000±500 (25°C) |
|
Mix ratio(weight/volume) |
1 |
1 |
|
Cured mechanical properties |
||
|
Working time （25℃）h |
1 |
|
|
Cure conditions |
||
|
Durometer JIS A |
50±5 |
|
|
Tensile strength MPa |
>1.0 |
|
|
Elongation % |
>70 |
|
|
Thermal conductivity W/m·K |
||
|
Flammability |
UL94V0 |
|
|
Electrical properties |
||
|
Volume resistivity Ω﹒cm |
>1×1014 |
|
|
Dielectric strength kV/mm |
20 |
|
OTHER CAUTIONS OF GOLOHO-4313-AB
Curing processing will be prevented if contact with condensed silicone rubber and gas released, N, P, S, heavy metal chemicals
Wear an eye-patch and gloves during operation, keep the environment be ventilated
Packaging: A, 25kg, B, 25kg
Storage: shelf life is 6 months when it stored in cool dry place under the condition of 22℃ and RH<55%. Keep out of the reach of children.
Without notice, the contents of this article may be changed due to the product performance improvement and specification.
We just only ensure the specifications of our products. You have to test the rtv greasebefore using to conform if it is suitable for your use.
Our products are developed for general industrial use.
Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline:
在线联系供应商
Other supplier products
 |
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB | FEATURES OF GOLOHO-4313-AB Flammability,UL-94V0 certification Excellent resistance to high and low temperature, weather, ultraviolet light and agin... |
 |
RTV-1 Silicone Rubber | RTV-1 Silicone Rubber RTV-1 silicone is a conductive silicone rtvthat is gradually cured from outside to inside by contacting with moisture in the ... |
 |
Light Cure Conformal Coating - L226 | Led seal spray- L226 FEATURES OF GOLOHO-L226 UV rapid cure one-component, 100% solid content low viscosity emperature resistance: -55~120℃ Descri... |
 |
High Performance Silicone Adhesive/Sealant - 2402W | FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a heat cure silicone adhesivessilicone glue ·Convenient to use: one... |
 |
High Performance Silicone Adhesive/Sealant - 2402W | FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a high-performance heat resistant RTV silicone gluefor electronics. &midd... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
Cover Tape | 卖方: Zhuhai Tongxi Electronics Technology Co., Ltd | Cover tapeis a strip material used for SMD packaging of electronic products, often used in conjun... |
 |
Acrylic Design Artwork Cutting | 卖方: Beijing KangDa ShengXin Acrylic Products Co., Ltd | Acrylic Design Artwork Cutting PRODUCT DESCRIPTION We specialize in custom acrylic high process... |
