Shoelace anti-siphon tester
Product Introduction:
Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon waterproof performance.
Anti-siphon:
The force phenomenon of the difference in liquid level height is used to draw water from low places to high places. The anti-siphon effect on textiles is similar to the capillary effect. After the fabric touches the water, the water will spread through the fabric and spread to the high places of the fabric.
Waterproof:
Refers to the waterproof agent on the surface of the fabric to form a film, so that water can not penetrate the inside of the fabric is called waterproof.
Anti-siphon can be divided into static anti-siphon and dynamic anti-siphon two categories. Static anti-siphoning is to adopt a static suspension method to observe whether the liquid immersed in the fabric has a climbing phenomenon, and the climbing height to assess whether it is qualified.
Product Advantages:
Measures Key Moisture Management Property: Quantifies static wicking or anti-siphon behavior, which is important for footwear comfort and preventing water ingress.
Suitable for Various Materials: Applicable to a range of footwear components and materials, including textiles, leather, and laces.
Simultaneous Testing: Allows testing of multiple samples concurrently (up to 20), increasing efficiency.
Provides Objective Measurement: Measures the actual height of water climb over a specified time.
Simple Test Principle: The static suspension method is straightforward to implement and understand.
Product Features:
Stand or rack with multiple stations for vertically suspending test specimens.
Water bath or trough at the base with controlled water level (450mm maximum height capability, although the immersion position is 13mm).
Clips or clamps to hold the upper end of the samples securely on the suspension stand.
Measuring scale or ruler positioned alongside each sample to accurately read the height of water rise.
Capability to test a specific number of samples simultaneously (20 samples).
Designed to accommodate specific sample sizes based on material type (Leather, mesh: 7625MM; Shoelaces, webbing: 76width MM; Line type: 76*width MM).
Designed for testing with a specific immersion position (13mm) and suspension times (0.5 hours and 2 hours).
Sampling requirements:
1. Leather, mesh: 76*25MM
2. Shoelaces, webbing: 76* width MM
3. Line type: 76* width MM
4. Samples can be tested at the same time: 20
5. Water level height: 450mm
Test requirements:
1. Immersion position: 13MM(0.5 inches)
2. Suspension time: 0.5 hours and 2 hours
在线联系供应商
Other supplier products
 |
End-face rotary friction and wear testing machine | Main uses: The end-face rotary friction and wear testing machine is mainly used to evaluate the wear resistance and tribological behavior of mater... |
 |
Residual Ethylene Oxide Gas Chromatograph | The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica... |
 |
Dry microbial penetration resistance tester | DryMicrobial Penetration Resistance Testeris designed to determine determine the penetration resistance of material to bacterial on dry particulate... |
 |
Shoe Sole Heat Resistance Tester | Main uses: The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high... |
 |
Dental Implants Static Torsion Testing Machine | Standard ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and da... |
Same products
 |
Scott Flex Tester | 卖方: 标准集团 | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | 卖方: 标准集团 | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | 卖方: 标准集团 | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
