|
|
Locomotive wire dynamic cutting test machine |
Applicable standards:
Test requirements in EN50305EN50306:2002
Main functions:
1. Fix the sample on the steel platform, place the indenter wit... |
|
|
Dynamic cutting test instrument for fluorine-containing wire for aerospace applications |
Applicable industry:
This instrument is the main instrument for testing the mechanical strength of fluorine containing wire for aerospace, and it ... |
|
|
Automobile wire cyclic bending testing machine |
In terms of technical parameters: The swing angle can reach 180 degrees clockwise or counter - clockwise. It is also possible to continuously set a... |
|
|
Vibration and Abrasion Resistance Tester for Automotive Wire-to-Wire |
In terms of main parameters: The vibration frequency of the vibrating table is 10Hz, the amplitude is 6.35±0.25mm, and the vibration directi... |
|
|
Dynamic Bending Tester for Automotive Wires |
Main parameters: The length of the test sample is 200mm, and the clamping length of the test sample is 128mm. The minimum dynamic bending angle is ... |
|
|
Wire bending tester |
Product Introduction:
Wire bending tester meets JIS-C-3005 test standard. The sample is inserted through the specified round hole according to thi... |
|
|
Automobile Wire Adhesion Tester |
### Main Parameters 1. Capacity: 50kg 2. Test stroke: 400mm 3. Speed: 10 - 300mm/min 4. Power system: AC servo motor 5. Volume: 80X60X170(cm) 6. We... |
|
|
High - temperature Pressure Testing Device |
### Standards Compliance ISO 6722, SAEJ 1128, QC/T 730, GB/T 33549, CQC1103 - 1105 - 2015, etc. ### Main Configurations 1. Testing device: 2 - stat... |
|
|
Thermal Elongation Testing Device |
Introduction to Thermal Elongation Testing Device The thermal elongation testing device is used to measure the elongation and deformation of the in... |
|
|
Automobile Wire Cross-linking Test Device |
Applicable Standards:
SAE J1128 - 2005 and other standards
Main Parameters:
1. Test rod: Φ6mm, 300mm in length
2. Hot plate specification: ... |
|
|
Low - temperature Winding Tester for Automotive Wires |
The low - temperature winding tester for automotive wires is used to assess and determine the performance of circular wire cables or circular insul... |
|
|
Low - temperature Impact Test Device for Automotive Wires |
Test standard:
ISO 6722, ISO 14572, ISO 19642, SAEJ 1128, QC/T 730, JASOD611-2009
Technical parameters:
1） Low temperature impact height: 50-2... |
|
|
Car wire heat resistant water (salt water) testing machine |
Scope of application:
It is suitable for long-term （more than 14 days） DC voltage and salt water resistance test of automobile wire and locomotive... |
|
|
High - voltage DC Stability Tester |
The high - voltage DC stability tester is suitable for testing DC high - voltage within the range of 0.1 - 5.00KV and continuously recording the va... |
|
|
Liquid Resistance Tester for Automotive Wires |
Test Standards:
Requirements for liquid resistance tests of automotive wires in ISO 6722, SAE J1128, QC/T 730, and JASOD611
Main Parameters:
T... |
|
|
Ozone Aging Chamber for Automotive Wires |
The ozone aging chamber for automotive wires is used to test the ozone - resistant aging performance of rubber and its products.
Applicable Stan... |
|
|
Temperature and Humidity Alternating Test Chamber for Automotive Wires |
The temperature and humidity alternating test chamber for automotive wires conducts temperature and humidity alternating tests on automotive wires.... |
|
|
Flammability Tester for Automotive Wires |
Applicable Standards:
Requirements of QC/T703 - 2005, SAE - J 1128 - 2005, DIN 72551, ISO6722 and other standards
Main Parameters:
1) The test... |
|
|
(Ford) Automotive wire flexibility testing machine |
Scope of application:
Suitable for wire flexibility test with nominal cross-section ≤3.0mm2.
Applicable standards:
Engineering Specificatio... |
|
|
Wire Cut - through Tester for Ford Automotive Wires |
Applicable Standard:
Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA
Technical Parameters:
1. Sens... |
|
|
(Changan) automobile wire and wire bending testing machine |
Scope of application:
Changan Automobile "JT automobile low-voltage wire technical conditions" standard
Technical parameters:
1, swing Angle: ... |
|
|
High pressure testing machine series (automatic pressure boost) |
Product Introduction:
Automotive wire AC and DC high voltage testing machine for wire and cable products to test the insulation between the core a... |
|
|
Sand and Dust Test Chamber for Automotive Connectors |
The sand and dust test chamber for automotive connectors meets the requirements of protection - class tests for the enclosures of household applian... |
|
|
Sulfur Dioxide and Hydrogen Sulfide Corrosion Test Chamber for Automotive Connectors |
Meeting Standards:
Carry out various sulfur dioxide gas corrosion tests in accordance with GB10587 - 89, GB2423.9 - 93, GJB150, QC/T417.1 - 2001 a... |
|
|
Salt Spray Tester for Automotive Connectors |
The salt spray tester for automotive connectors is suitable for testing the corrosion resistance of various material surface treatments, including ... |
|
|
Air - tightness Testing Device for Automotive Connectors |
The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containers... |
