Standard International Group (HK) Limited
Контактная информация
Standard International Group (HK) Limited
Для того, чтобы связаться с поставщиком, необходимо авторизоваться или пройти регистрацию
Товары:
 |
Locomotive wire dynamic cutting test machine | Applicable standards: Test requirements in EN50305EN50306:2002 Main functions: 1. Fix the sample on the steel platform, place the indenter wit... |
 |
Dynamic cutting test instrument for fluorine-containing wire for aerospace applications | Applicable industry: This instrument is the main instrument for testing the mechanical strength of fluorine containing wire for aerospace, and it ... |
 |
Automobile wire cyclic bending testing machine | In terms of technical parameters: The swing angle can reach 180 degrees clockwise or counter - clockwise. It is also possible to continuously set a... |
 |
Vibration and Abrasion Resistance Tester for Automotive Wire-to-Wire | In terms of main parameters: The vibration frequency of the vibrating table is 10Hz, the amplitude is 6.35±0.25mm, and the vibration directi... |
 |
Dynamic Bending Tester for Automotive Wires | Main parameters: The length of the test sample is 200mm, and the clamping length of the test sample is 128mm. The minimum dynamic bending angle is ... |
 |
Wire bending tester | Product Introduction: Wire bending tester meets JIS-C-3005 test standard. The sample is inserted through the specified round hole according to thi... |
 |
Automobile Wire Adhesion Tester | ### Main Parameters 1. Capacity: 50kg 2. Test stroke: 400mm 3. Speed: 10 - 300mm/min 4. Power system: AC servo motor 5. Volume: 80X60X170(cm) 6. We... |
 |
High - temperature Pressure Testing Device | ### Standards Compliance ISO 6722, SAEJ 1128, QC/T 730, GB/T 33549, CQC1103 - 1105 - 2015, etc. ### Main Configurations 1. Testing device: 2 - stat... |
 |
Thermal Elongation Testing Device | Introduction to Thermal Elongation Testing Device The thermal elongation testing device is used to measure the elongation and deformation of the in... |
 |
Automobile Wire Cross-linking Test Device | Applicable Standards: SAE J1128 - 2005 and other standards Main Parameters: 1. Test rod: Φ6mm, 300mm in length 2. Hot plate specification: ... |
 |
Low - temperature Winding Tester for Automotive Wires | The low - temperature winding tester for automotive wires is used to assess and determine the performance of circular wire cables or circular insul... |
 |
Low - temperature Impact Test Device for Automotive Wires | Test standard: ISO 6722, ISO 14572, ISO 19642, SAEJ 1128, QC/T 730, JASOD611-2009 Technical parameters: 1） Low temperature impact height: 50-2... |
 |
Car wire heat resistant water (salt water) testing machine | Scope of application: It is suitable for long-term （more than 14 days） DC voltage and salt water resistance test of automobile wire and locomotive... |
 |
High - voltage DC Stability Tester | The high - voltage DC stability tester is suitable for testing DC high - voltage within the range of 0.1 - 5.00KV and continuously recording the va... |
 |
Liquid Resistance Tester for Automotive Wires | Test Standards: Requirements for liquid resistance tests of automotive wires in ISO 6722, SAE J1128, QC/T 730, and JASOD611 Main Parameters: T... |
 |
Ozone Aging Chamber for Automotive Wires | The ozone aging chamber for automotive wires is used to test the ozone - resistant aging performance of rubber and its products. Applicable Stan... |
 |
Temperature and Humidity Alternating Test Chamber for Automotive Wires | The temperature and humidity alternating test chamber for automotive wires conducts temperature and humidity alternating tests on automotive wires.... |
 |
Flammability Tester for Automotive Wires | Applicable Standards: Requirements of QC/T703 - 2005, SAE - J 1128 - 2005, DIN 72551, ISO6722 and other standards Main Parameters: 1) The test... |
 |
(Ford) Automotive wire flexibility testing machine | Scope of application: Suitable for wire flexibility test with nominal cross-section ≤3.0mm2. Applicable standards: Engineering Specificatio... |
 |
Wire Cut - through Tester for Ford Automotive Wires | Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens... |
 |
(Changan) automobile wire and wire bending testing machine | Scope of application: Changan Automobile "JT automobile low-voltage wire technical conditions" standard Technical parameters: 1, swing Angle: ... |
 |
High pressure testing machine series (automatic pressure boost) | Product Introduction: Automotive wire AC and DC high voltage testing machine for wire and cable products to test the insulation between the core a... |
 |
Sand and Dust Test Chamber for Automotive Connectors | The sand and dust test chamber for automotive connectors meets the requirements of protection - class tests for the enclosures of household applian... |
 |
Sulfur Dioxide and Hydrogen Sulfide Corrosion Test Chamber for Automotive Connectors | Meeting Standards: Carry out various sulfur dioxide gas corrosion tests in accordance with GB10587 - 89, GB2423.9 - 93, GJB150, QC/T417.1 - 2001 a... |
 |
Salt Spray Tester for Automotive Connectors | The salt spray tester for automotive connectors is suitable for testing the corrosion resistance of various material surface treatments, including ... |
 |
Air - tightness Testing Device for Automotive Connectors | The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containers... |
