Three Components Low Pressure Polyfoam Injection Machine
Introduction of polyfoam injection machine: This three components low-pressure polyfoam injection machine is especially suitable for manufacturing double-color or double-density PU polyfoam products like toys, double-color shoe soles, double-density seat cushions, etc.
Its operation principle is the same as the machine of two components: liquid monomers or pre-polymers , according to a certain blending ratio, are delivered into the mixing head to agitate and then injected into mould and harden into shape, becoming finished product after being ripened and being demoulded. There is a slide switch on this machine’s electrical control cabinet so as to choose one of a material to react with B material.
Technical parameters of three components low-pressure polyurethane injection machine:
|
Mixing Ratio |
A:B=2.5:1 |
A:B=1:1 |
or in accordance with technical requirement |
|
|
Throughput Range (gms/sec) |
1000～7000 |
1000～7000 |
7 scales in total, see throughput list for details |
|
|
Volume of Loading Tank (L) |
40-300 |
40-300 |
40, 120, 150, 220, 330 |
|
|
Number of Loading Tanks |
3 |
3 |
|
|
|
Revolution of Mixing Head (rpm) |
3500-4500 |
3500-4500 |
|
|
|
Program-controlled Points |
12 |
12 |
40 points or 200 points if on request |
|
|
Viscosity Requirement (CPS) |
＜2000 |
＜2000 |
|
|
|
Temperature Adjusting Range (℃) |
0-50 |
0-50 |
|
|
|
Total Power (kw) |
9-18 |
9-18 |
6kw for heating |
|
|
Form of Mixing Head Assembly |
Crane or overhead travelling |
|||
|
External Dimensions (m) |
||||
在线联系供应商
Other supplier products
 |
Cold storage panel line | The line can make PU cam lock panel, its standard width is 960mm and the length in the common is less than 6.5m. It can make small cold room, pan... |
 |
Flat Top Polyurethane Foaming Production Line | Introduction of flat top polyurethane foaming production line:The flat top polyurethane foaming production line is currently main PU production e... |
 |
Lamination Machine | Lamination Machine Description:This lamination machine series include adhesive lamination machine and flame lamination machine, which use glue... |
 |
Normal Temperature Elastomer Polyether Injection Machine | Technical Parameters of Normal-Temperature Type Elastomer Polyether Injection Machine: Mixing Ratio Material A: Material B =100:90 ... |
 |
Adhesive Lamination Machine | Introduction:The adhesive lamination machine serves to compound two coiling materials by gluing adhesive, usually for the compounding between fab... |
Same products
 |
全自动开料机 GT-ACT29 | 卖方: 肇庆古雷特科技有限公司 | 自动管材切割机用于自动切割加热元件的管材。主要用于大规模生产中的加热器制造。适用于铜管、铁管、不锈钢管、铝管等。*主要详情1. 自动送料、切割、断管和自动卸管。2. 可以裁剪成两种不同的长度。3... |
 |
Anti-corrosion SSAW Steel Pipe | 卖方: HEBEI TIRICO PIPELINE CO.,LTD | Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ... |
 |
1435mm 数显轨距尺 | 卖方: 武汉联科瑞际轨道设备有限公司 | 铁路数显轨距尺主要用于铁路线路轨距、超高、查照间隔、护背距离 的测量。可供工务维修、大修、工程测量及其他有关部门线路作业时使用。 该仪器测量速度快、使用方便，白天、夜间均可使用，是工务、工程部门... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | 卖方: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | 卖方: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
