3 Plate Mould 49113-21
Mould Name: 3 Plate Insert Mould
Part Material: PBT GF15
Product Size: ф34.9x82.29
Product Description: Mischschraube kpl
Mould Cavity: 2 Cavities
Mould Size: 250*230*350 MM
Mould Cavity Steel: 2343 ESR
Mould Injection System: 3-Plate point gate
Mould Ejection System: Round ejector
Mould Cycle Time: 28's
Mould Life Cycle: 500,000
Lead Time: 45 working days
Mould Features: insert molding
mold 3 plateis also called pinpoint gate mould.
There are two parting surfaces to divide the mold into three parts. Compared with the 2 plate mould, the gate plate of three plastic plate mouldis added. It is suitable for the molds that do not allow gate marks around the product. This type of mold uses a pointed gate, so it is called pinpoint gate mold.
The typical three plate mouldmovement process
The mold opening process: the three-plate mold has two parting processes, the first between the stripping plate and the cavity plate, and the second time between the cavity plate and the core plate. When the core side is pulled by the injection molding machine, as the A and B plate are equipped with a latch lock, and there is no connection or obstruction between the stripping plate and the A plate (in most cases, the pull rod is also equipped with a spring) At this time, the stripping plate is first separated from the cavity plate by the pulling force, and the cavity plate moves backward with the core plate. When moving to the set distance, it is blocked by the pull rod limiting block, because the A plate continues to move with the injection molding machine. Therefore, the pull rod is also driven, and the pull rod drives the stripping plate to move to the next set distance and then the pull rod and the cavity plate stops moving.
The injection molding machine continues to move backward, as the pulling force continues to increase, exceeding the locking force of the latch lock, the A plate is separated from the B plate, and stops when the set distance is reached.
The ejector plate drives the ejector mechanism (the ejector pin, the ejector rod, and the lifter) to start the ejection movement, and the finished product is ejected (automatically dropped or removed by the robot).
Clamping process - When there is a pullback mechanism on the ejector plate, the ejector plate is forcibly pulled back by the injection molding machine before clamping.
Under the push of the injection molding machine, the core moves forward to the cavity side, if the ejector plate is not pulled back in advance, the return pin first contacts the cavity plate. Under the reaction force, the ejector plate is returned by the return pin.
The B plate is pressed against the A plate and the stripping plate, and finally completely tight. The nozzle on the injection molding machine is closely fitted with the nozzle bushing on the mold, and the next cycle of injection molding is started.
Following the concept of customer first, hanking molddedicates to be a trustworthy tooling company by designing and manufacturing plastic injection molds, providing custom plastic molding manufacturing and services according to every individual's requirements. Hanking's successes are ensured by our management capability, technical knowledge, advanced plastic tooling equipment and professional injection molding services. We are pursuing better quality and technical capability to meet the demands of increasing mold making markets.
We are a responsible chinese molding companiesand mold maker company in China and have experience in supplying custom plastic injection molding service for many years. Our production sites have been accredited the certification of TS16949, ISO 14001 and ISO 9001, etc. You can fully trust our production sites, products and place your orders.
在线联系供应商
Other supplier products
 |
Plastic Insert Mold | Plastic Insert Mold 139-86 Mould Name: Plastic Insert Mold Part Material: PA + Glassfiber Product Size: 11*30*1.3 Product Description: St... |
 |
Plastic Parts Gallery | It is a complex task to design plastic parts involving many factors according to varoius requirements for different industires. "How is the part to... |
 |
Double Injection Mold Parts | Details OfDouble Injection Molding ProcessPart function: Plastic Lid for coffee machine Part Standard according to ISO 11496 Surface: SPI A-2 finis... |
 |
Double Shot Plastic Injection Mold Products | Double Shot Plastic Injection Mold Products Part function: Jug Cap Part material: PP & POE Cavity: 2+2 cavities Cavity steel: ASSAB 8418 Li... |
 |
Double Injection Mold Parts | HanKing MouldEnginering Ltd. started the business in the year of 1996 as one of the chinese plastic injection molding companiesin the line of mold ... |
