Valve Tappet Eddy Current Flaw Detector QMTZET-04
Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area to be inspected by clamping and transverse moving. The workpiece surface is scanned by a point probe, which can inspect the outer circle, bottom surface and chamfered end surface of the tappet at the same time. At the same time, the system also supports automatic charging, automatic detection and automatic sorting. It can also be connected to the production line of the factory and can be selected for off-line automatic detection and sorting.
Valve Tappet Eddy Current Flaw Detector QMTZET-04 Brief Introduction
The tappet of the valve top-mounted gas distribution mechanism is generally made into a cylinder to reduce the quality. The roller type tappet is a kind of tappet, which has the advantage of reducing the lateral force against the friction caused by the friction. This kind of tappet is complex in structure and large in mass and is generally used on large-bore diesel engines. The tappet is usually made of nickel-chromium alloy cast iron or cold-alloy alloy cast iron, and the friction surface should be ground after heat treatment. There are three types of tappets: bacteria, cartridge, and roller.
The automobile engine valve tappet is an important gasoline engine component. In the engine valve type gas distribution mechanism, it is composed of a valve group and a valve transmission group, and the tappet is a main component of the valve transmission group except for the camshaft. The valve tappet is the follower of the cam. Its function is to transmit the motion and force from the cam to the valve while also receiving the lateral force exerted by the cam and transmitting it to the cylinder head. In the course of service, the valve tappet fails to break in advance due to quality reasons, which causes the valve guide, valve and timing chain to break and fail successively. After the engine is turned off, the engine cannot be started, which eventually causes the engine to be scrapped.
As one of the most professional non destructive testing equipment manufacturers, BKNprovidesndt testing machine, ndt testing, ndt ultrasonic testing equipment, tap testing ndt, etc. Want to knowmore? Please contact us.
在线联系供应商
Other supplier products
 |
Magnetic Flux Leakage Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Mag flux testingis a magnetic method of nondestruc... |
 |
Portable Magnetic Flux Leakage Testing Equipment | Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects... |
 |
GTET-02 Cylinder Liner Eddy Current Testing Machine | GTET-02 Cylinder Liner Eddy Current Machine Introduction The rate of missed standard defect is 0%; the rate of false positives (only misidentifi... |
 |
Magnetic Flux Leakage Testing Equipment | What Is Magnetic Flux Leakage Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leaka... |
 |
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator | Eddy Current Brake for Sale Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by th... |
Same products
 |
Bakon BK191: The Ultimate Tool for Soldering Iron Temperature Control | 卖方: 深圳市维客修科技有限公司 | 描述 Bakon BK191 烙铁头温度计测试仪 (0 - 600°C) 用于焊接维修、电烙铁温度测试仪、焊台温度计。 烙铁头温度计提供可靠的烙铁头温度控制 紧凑的设计节省您的工作空间... |
 |
MaAnt BGA Solder Paste Halogen-free Lead-free Repair Flux | 卖方: Phonefix | MaAnt UP-79 MY-224 MY-225 halogen-free solder paste for mobile phone/electronic circuit board CPU... |
 |
3 Inch Ceramic Bond Hybird Transitional Polishing Pads For Concrete | 卖方: Xiamen ChinShine Industry and Trade Corporation | – Available Grits: 30, 50, 100, 200,400. – Use wet or dry. Pad Materials –... |
 |
LUOWEI LW-PT03 LW-PT02 CPU芯片植锡硅胶垫 | 卖方: 深圳维客修科技有限公司 | 描述 罗威 LW-PT03 LW-PT02 CPU芯片植锡平台带耐热硅胶垫，用于电子/手机BGA芯片焊接修复。防滑、不鼓起、耐高温。罗威多功能BGA植锡磁力平台具有零误差定位和可扩展底座，适用于... |
 |
AWithZ UF20B 超级法拉电容点焊机，用于电池主板 PCB 焊接 | 卖方: 深圳维客修有限公司 | 描述 AWithZ新款法拉电容UF20B点焊机聚能焊接0.4mm可焊铜适用于手机电池主板PCB焊接维修。AWithZ UF20B小型便携式超法拉电容点焊机，配WP110和WP120点焊笔，具有A... |
