Anti-glare Panel Falling Weight Tester
Meet the standard
GB/T24718-2023，GB/T 24718-2009，JTG/T D33-2012
Scope of application
The anti-glare board impact testing machine is designed and produced for each testing unit to measure the impact resistance of the anti-glare board, which is suitable for plastics, plastic products ceramics, glass fiber, tempered glass and other materials and test the hardness of coatings.
Instrument features
With a sample holding device, to prevent inaccurate results caused by random sample projectiles;
With protective protection plate, to prevent the ball from secondary collision with the sample and the ball bounce injury;
Double overshoot protection, the overshoot motor automatically stops, need to be manually lifted to prevent damage to the instrument and protect the user;
Program with automatic memory function, power off or unplug, is still the memory setting before power off;
Motor with holding brake function, the arm will not slide down in the case of power failure;
Laser rangefinder ranging, ranging accuracy;
Two modes of operation, namely automatic and manual two ways;
Low-voltage components such as: brand buttons, relays, AC contactors, etc., stable performance, safe and reliable;
Easy to install, easy to operate, long service life.
Standard configuration
1. One host
2. 1 standard iron ball
3. One national standard power cable
4. Product packing list 1 copy
5. 1 copy of product manual
6. One copy of product certificate
Technical parameters
Electromagnet suction 50kg
The steel ball weighs 1kg±10g
Steel ball diameter 63mm
Cantilever extension length 350mm(310mm from the center of the ball)
Cantilever lifting stroke 300mm(i.e. impact height can be adjusted at 900-1200)
Laser sensor measurement accuracy 1mm
The laser sensor has an error of 5 parts per thousand
Laser spot 0.5-1mm
The diameter of the anti-secondary impact partition is 65mm, and the height is adjustable from 20-110mm
Weight 130kg
在线联系供应商
Other supplier products
 |
Shoelace Abrasion Tester | Standards SATRA TM93、DIN-4843、QB/T2226、SATRA TM154 Principle Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eye... |
 |
Coating Thickness Gauge | Product features: 1. Strictly in accordance with the standard design of the contact area and measurement pressure, while supporting a variety of n... |
 |
Toyota Specialized Abrasion Tester-QINSUN | Standard JIS L 0849(Japanese Industrial Standard for Abrasion Resistance of Textiles) ISO 5470-2(Rubber- or Plastics-Coated Fabrics — Abras... |
 |
Paper stiffness tester | Compliance Standards: ISO 5628、ISO 2493 TAPPI T489、TAPPI T556、JIS P 8125 Product Introduction: ZY-TDY300 microcomputer bending stiffness tester... |
 |
Fabric Negative-ion Concentration Tester-QINSUN | Standard GB/T 30128-2013: Textiles – Test and Evaluation of Negative Ion Generation Application Functional Textile R&D: Assesses air-p... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
