MST clothing pressure tester-QINSUN
Product Introduction
The MST Clothing Pressure Tester/Underwear Pressure tester is used in the body or
in the laboratory to easily measure the pressure of elastic bandages and clothing in
medicine, sports, fashion and other fields.
Starting with the MST Mark V version, software updates are available for additional
features. MST Mark III and later, MPT-4. and MPT-7 can also be connected without a
software update.
Compliant standards
ENV 12718.CEN/TR 15831.RAL-GZ 387/1.RAL-GZ 387/2.FZ/T 73031.YY/T 0851.YY/T 0853
Scope of application
1. Foot, knee, elbow bandages, etc.;
2. Scarves, sleeves, tubes, tights, leggings, sweatpants, belly belts, back supports;
3. Functional underwear, sports bra, compression shirt, cycling shorts, shapewear;
4. Full body sportswear, space suit, hospital protective suit, rescue suit, military
uniform, military uniform, etc.
The MPT-4 has four multipoint probes and can also be directly connected to all older
MST Mark X versions.
The MPT-7 has seven multipoint probes and is recommended for use with MST Mark
V devices. The MPT-7 can only operate to a limited degree on the older MST Mark X
versions because they only have six measuring points.
Main parameter
Multi-point probe:
1. Diameter :50 mm;
2. Tube length :1000 mm;
3. Maximum pressure :80 mm Hg or 10.6 kpa;
4. Measuring range :55-70 mm Hg or 0.7-9.3 kpa;
5. Features: waterproof, washable, sterilizable.
Electrical connection data:
1. Input voltage range :100-240VAC;
2. Input frequency :50-60 Hz;
3. Power consumption :35 watts.
在线联系供应商
Other supplier products
 |
Bundle wire and cable burning test machine | Standards According to IEC60332-3-10:2000.and GA306.1-2007 Main components Testing chamber, electric control system, air source, ignition sour... |
 |
Paper Crease Stiffness Tester | Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measure the bending stiffness of paper and cardboard materials w... |
 |
Leather Seam Fatigue Tester | Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing fo... |
 |
Leather Bending Resistance Tester | Applicable Standards The tester adheres to global standards for leather physical testing, including: ISO 5402-1(Leather – Physical and me... |
 |
Rating Observation Board-QINSUN | Product Overview TheRating Observation Boardis an intelligent monitoring system designed for real-time evaluation and visualization of product qua... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
