Precision thermal conductivity tester for R&D and quality control
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
TheHigh-Precision Material Thermal Conductivity Tester is suitable for steady-state thermal performance evaluation of materials with low to medium thermal conductivity, including:
Thermal insulation materials
Plastics and polymer-based materials
Rubber and elastomer materials
Aerogel panels and advanced insulation boards
Vacuum glass and building energy-saving materials
Solid materials and powder materials (with appropriate sample configuration)
The instrument is widely used in universities, research institutes, quality inspection laboratories, and industrial material testing facilities for thermal conductivity and thermal resistance analysis.
Standards
The instrument is designed and operated in accordance with the following international and national standards:
GB/T 10295-2008
Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter method
ASTM E1530
Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
ASTM C518-04
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
Parameters
| Item | Specification |
|---|---|
| Thermal conductivity range (low range) | 0.0001 – 1 W/m·K (resolution up to 0.1 mW/m·K) |
| Thermal conductivity range (extended) | 0.001 – 300 W/m·K |
| Measurement accuracy | ±1% |
| Sample size | 50 × 50 to 300 × 300 mm |
| Maximum sample thickness | ≤ 50 mm |
| Optional sample sizes | 600 × 600 mm, 800 × 600 mm (customized) |
| Applicable sample form | Solid materials, powder materials |
| Test duration | 15 – 20 min |
| Hot plate temperature range | Room temperature to 99.9 °C (standard) |
| Optional hot plate range | Room temperature to 499.9 °C or higher (by agreement) |
| Hot plate control accuracy | 0.1 °C |
| Cold plate temperature range | 0 – 99.9 °C (standard); –10 – 99.9 °C optional |
| Cold plate temperature control | Water-cooled, precision constant-temperature bath |
| Cold plate control accuracy | 0.1 °C |
| Pressure range | 0 – 1000 N |
| Pressure resolution | 0.1 N |
| Thickness measurement range | 0 – 50 mm |
| Thickness resolution | 0.1 μm |
| Heat flow sensor | Imported original heat flow meter |
| Test operation | Fully automatic computer-controlled testing and data storage |
| Power supply | AC 220 V / 50 Hz |
Test Procedures
Prepare the specimen according to size and thickness requirements.
Place the specimen between the hot plate and cold plate.
Set the target hot-side and cold-side temperatures in the software.
Apply pressure automatically to ensure stable contact.
Allow the system to reach steady-state heat transfer conditions.
Measure the heat flux and temperature gradient across the specimen.
Calculate thermal conductivity and thermal resistance automatically.
Save and print test data and reports.
Maintenance Information
Keep hot and cold plate surfaces clean and undamaged
Ensure proper operation of the constant-temperature water bath
Periodically check sensor performance and calibration status
Maintain stable laboratory environmental conditions during testing
Store reference samples and accessories properly when not in use
在线联系供应商
Other supplier products
 |
UV curing light box | Standard ISO 10977: Adheres to industrial standards for UV curing of adhesives and coatings. ASTM E3022: Meets requirements for radiometric measu... |
 |
Laboratory and industrial friction and wear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Materials science research: Evaluation of friction and wear behavior of metals... |
 |
Photographic Fill Light Chamber | Standard CE & FCC Certified: Meets electromagnetic compatibility and safety standards for EU/US markets. RoHS Compliant: Lead-free constructi... |
 |
Compression resistance tester for textiles | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The G5 Compression Tester is suitable for: Fibers and Textiles: Compression c... |
 |
Resistance of Materials to Molten Metal Splash | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description: The tester is according to the ISO 9185-2007.This International Standard sp... |
Same products
 |
Geotextile Effective Aperture Tester | 卖方: Standard Groups | Geotextiles are fabrics made primarily from synthetic fibers through processes such as needle pun... |
 |
Geosynthetics Vertical Penetration Tester | 卖方: Standard Groups | The geosynthetic material vertical permeability tester is a horizontal constant-head testing inst... |
 |
Midsole Fibreboard Bending Test Machine | 卖方: Standard Groups | G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoe... |
 |
G651 Shoes Bending Tester | 卖方: Standard Groups | The Shoe Bending Tester is designed to evaluate the flexing resistance and durability of finished... |
 |
Geotextile Dynamic Puncture Tester | 卖方: Standard Groups | The geotextile dynamic puncture tester is used to test the resistance of various geotextile mater... |
