Long Square Flange Linear Bearing KBK-L 2019
ISUTAMI KBK-L long square flange linear bearings, also known as KBK-L long square flange linear ball bearings or KBK-L long square flange linear bushing bearings. KB is the code name of the European standard series in linear bearings, F is the meaning of square flange, L is the abbreviation of long. It is suitable for the EU markets of using metric units, such as Germany and France.
The material of KBK-L long square flange linear bearnigbushing and steel balls are high carbon bearing steel. The ball retainer is made of metal steel, stainless steel or POM, and the sealing ring, usually U or P represented, is made of NBR material. The ball retainer is mounted inside the bushing together with the steel balls and sealed with a retaining ring from one side or both sides of the linear bushing.
Long Square Flange Linear Bearing KBK-L Features
The outer bushing surface of KBK-L long square flange linear bearing is complete. There is not any outer stop grooves, and a square flange at one end of the bushing. The flange part is evenly distributed with four connection holes for fixing the entire bearing. The number of ball rows of KBK-L European metric series linear bearings supplied by ISUTAMI varies according to the bearing size, and ranges from 4 to 6 columns. Inner diameter (dr) range and tolerance, outer diameter (D) range and tolerance, length (L) range and tolerance, maximum radial eccentricity, basic dynamic load rating (C) range, basic static load rating (Co) range, etc., are all same with KB-L long linear bearing, KBF-L long circular linear bearing, KBFC-L long centered circular flange linear bearing, KBKC-L long centered square flange linear bearing. The specific parameters are shown in the table.
In addition, the diameter (D1) of KBK-L long square flange is larger than the diameter of the bushing, ranging from 25mm to 106 mm, which is consistent with KBK square flange linear bearing; the height of the flange (H) ranges from 5mm to18mm. This data is consistent with KBF circular flange linear bearing, KBF-L long circular flange linear bearing, KBK square flange linear bearing. Because it has a flange, the weight is bigger than KB-L of the same specification.
KBK-L long flange linear bearing has a square flange with a non-flanged linear bearing as a whole, and the corresponding module makes the shaft positioning simple. It does not need to be fixed in the matching bearing seat like the linear bearing. Therefore, it has become very economical, and the overall weight of the linear bearing assembly has been reduced, and the operation is smoother.
Unlike ball bearings, the basic static load rating of KBK-L long square flange linear bearing is greater than the basic dynamic load rating, and as the size increases, this value gap is even larger, even three times.
Flange bearings are suitable for all kinds of industrial equipment, small rotary motors, office equipment, micro motor soft drives, pressure rotors, dental drills, hard disk motors, stepper motors, video recorder drums, toy models, fans, pulleys, rollers, In transmission equipment, entertainment equipment, robots, medical equipment and other products.
As one of the most professional ball bearing manufacturers in china, ISUTAMI is committed to providing customers with the best possible quality bearing products at the most reasonable price. If you want to know more details or want a quotation, just feel free to contact us!
在线联系供应商
Other supplier products
 |
KBA-L Linear Bearing Pillow Block 2019 | ISUTAMI KBA-L long linear bearing , also known as KBA-L extended linear bearing unit, KBA-L extended linear slide unit or KBA-L extended linear cas... |
 |
KBA-AJ Linear Bearing Pillow Block 2019 | ISUTAMI KBA-AJ adjustment linear bearing pillow block, also known as KBA-AJ clearance-adjusting linear bearing unit,linear bearing pillow block eur... |
 |
Long Pilot Pattern Square Flange Linear Bearing LMKP-L 2019 | ISUTAMI LMKP-L long pilot pattern square flange linear bearing, also called LMKP-L long pilot pattern square flange linear ball bearing or LMKP-L l... |
 |
Plastic Mounted Bearing 2019 | ISUTAMI plastic mounted bearing adopts stainless steel bearing and engineering plastic base. Various engineering plastic series of ISUTAMI, such as... |
 |
Round Flange Mounted Units Pressed Steel 2019 | ISUTAMI pressed steel round flange mounted unit, also known as ISUTAMI 3-bolt pressed steel round flange mounted bearing unit, it consists of two m... |
Same products
 |
多级串联精密滚柱轴承T-3092-6A有货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-3092-6A项目代码：T-3092-6A结构：基本型串联推力圆柱滚子轴承原产地：中国洛阳润滑：油润滑外形公制尺寸：30*92*294mm它们在橡胶和塑料行业的平行双螺杆挤出机... |
 |
食品螺杆挤出机多级串联推力轴承T-2872-6A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-2872-6A项目代码：T-2872-6A原产地：中国洛阳润滑：油润滑外形公制尺寸：29*75*165mm外径D:75mm内径d:29mm总高度：165毫米它们在橡胶和塑料行业... |
 |
薄膜螺杆挤出机齿轮箱串联滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：395mm它们在橡胶和塑料... |
 |
PVC螺杆挤出设备齿轮箱滚柱轴承T-25105 8A | 卖方: JinHang Precision Bearing Co.,LTD | 应用：橡胶和塑料工业中单螺杆和双螺杆挤出机的变速箱。深孔钻削设备摩擦焊机。轴承出厂编号：T-25105 8A项目代码：T-25105.8A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*25... |
 |
食品挤出机多级串联推力轴承T-25105.6A工厂现货 | 卖方: JinHang Precision Bearing Co.,LTD | 轴承出厂编号：T-25105.6A项目代码：T-25105.6A原产地：中国洛阳润滑：油润滑外形尺寸：25*105*255mm外径D:105mm内径d:25mm总高度：255毫米轴承轴直径：0.... |
