Fabric Fiber Shedding Degree Tester (Friction)
Instrument Testing Principle
Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciprocating friction movements on the specimen under the specified load for a specified number of times with a certain stroke.
Then compare it with the standard sample and visually rate the degree of fibers adhered to the abrasive to characterize the degree of fiber shedding of the specimen. It is suitable for factories, scientific research institutes, colleges and universities, import and export commodity inspection, textile testing in various provinces and cities.
Features of the Instrument
- Touch screen controller: The number of frictions can be set arbitrarily.
- Backup mechanical buttons for buttons in the touch screen: They can be used simultaneously, which is convenient and fast.
- Pneumatic holder for specimen installation: Convenient and fast.
- Equipped with a calender for adjusting the moisture content of the abrasive: The roll-off rate can be adjusted.
-
Complies with the standard: Appendix A of GB/T 40270 - 2021
Main Technical Performances
- Stroke of the friction head: (200 ± 2) mm
- Reciprocating speed: 30 times/min
- Diameter of the circular friction head: (90 ± 1) mm
- Outer diameter of the fixed clamp ring of the friction head: (120 ± 0.5) mm, inner diameter: (90 ± 0.5) mm
- Diameter of the test washer: (113 ± 0.5) mm
- Foam plastic washer: Diameter 105 mm, thickness 8 mm, unit area mass approximately 270 g/m²
- Total mass of the friction load: (595 ± 7) g
- Sandpaper: 600 - grit aluminum oxide water - washable sandpaper
- Power supply: AC 220V, 50Hz
在线联系供应商
Other supplier products
 |
Anti Synthetic blood penetration tester | Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothin... |
 |
waterproof socks testing machine | Applications: Shoes Water Penetration Test Apparatus is used to test waterproof performance of shoes socks and shoes lining of rubber shoes. ... |
 |
Fabric Vertical Flame Spread Performance Tester | Fabric Vertical Flame Spread Performance Tester - Flammability Testing equipment price quotation - standard Standards: GB/T 5456-2009 Textiles-... |
 |
Footwear Cold Insulation Tester | Product Introduction: Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other tes... |
 |
Anti-crack fatigue tester | How it works: By simulating the cyclic loading stress that the material may be subjected to during actual use, such as tensile, compression, bendi... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
