Dual-axis Gun drilling Machine Tool

Overview:

Processing Method: outside chip removing; gun drill

Hole Diameter(mm): Φ1.5~Φ8

Hole Depth(mm): 500 (Draw Ratio≤100)

NC System: GSK980TDC / FANUC OI Mate TC

Drill Pipe: high speed mechanical spindle; frequency control; simultaneously rotating and

feeding

Workpiece: constant speed rotation

Guide Sleeve: axial restraint

Workpiece Clamping: based on the top of tail and cone disc of guide sleeve, to accurately

orientate workpiece by chamfer of the two sides;

pneumatic stretch out and draw back to fasten the workpiece.

Parameter:

Processing Ability:

1. Number of Spindle(pcs): 2
2. Hole Diameter(mm): Φ1.5~Φ8
3. Hole Depth(mm): ≤500
4. Diameter Range of Workpiece(mm): ≤Φ50
5. Length Range of Workpiece(mm): ≤500

Processing Speed:

1. Max Rotation Speed of Drill Pipe’s Spindle (r/min): 15000
2. Workpiece Rotation Speed(r/min): 500 (fixed)
3. Feeding Speed Range(mm/min): ≤1500
4. Forward Speed(mm/min): ≤2000

Processing Accuracy:

1. Hole Skewness: ≤0.5/1000 (workpiece rotating)

≤1.0/1000(workpiece fixed)

2. Dimensional Accuracy of Drill Pipe: IT7~IT11
3. Hole Rugosity: Ra0.4~Ra1.6

Power of Machine

1. Drill Pipe Motor Power(kw): 2X1.1
2. Workpiece Rotating Power(kw): 2X1.1
3. Oil Pump Power(kw): 2X4.0
4. Feeding Power(kw): 1.8
5. Power of Oil-temp Cooling Machine(kw): 2.8

Hydraulic System

1. Max Volume of Flow(L/min): 2X20 (dual-axis)
2. Max Pressure(Mp): 16
3. Filtering Accuracy(um): 10
4. Oil Storage Capacity(L): 960

Basic Dimension & Weight

1. Dimension (mm): 4500*3000*1500(L*W*H)
2. Height between Drill Pipe Centre and Ground(mm): 1070
3. Height between Drill Pipe Centre and Guide(mm): 297.0
4. Distance between Axles(mm): 220
5. Weight of Main Engine(kg): 5000

Other supplier products

	ZK2130C/1500 Single Axis Gun Drilling Machine Tool	Overview: Processing Method: outside chip removing; gun drill Hole Diameter(mm): Φ5~Φ30 Hole Depth(mm): 1500 Bench Traverse Distance(...
	Four-axis Gun drilling Machine Tool	Overview: Processing Method:  outside chip removing; gun drill Hole Diameter(mm):  Φ3~Φ15 Hole Depth(mm):  500; 1000; 1500 (Draw Ratio≤100) NC ...
	Four-axis Gun drilling Machine Tool	Overview: Processing Method:  outside chip removing; gun drill Hole Diameter(mm):  Φ10~Φ20 Hole Depth(mm):  500 NC System:  GSK980TDC Drill Pi...
	Dual-axis Gun drilling Machine Tool	Overview: Processing Method: outside chip removing; gun drill Hole Diameter(mm): Φ1.5~Φ8 Hole Depth(mm): 500 (Draw Ratio≤100) NC Sys...
	coating gun drill	Coated tool has characteristics as high surface hardness,good abrasion performance, stable chemical properties,small friction factor and lower ther...

供应产品

Same products

	SHJ Series Twin Screw Extruder	卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd.	The SHJ Series Twin Screw Extruder() represents a remarkable evolutionary step in the field of ex...
	Underwater Pelletizer	卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd.	The Underwater Pelletizer(), a technological marvel in the polymer processing sector, has redefin...
	Button sewing machine JM-373	卖方: Zhejiang Huaqi Information Technology Co., LTD	FeaturesIt is mainly used for sewing flat buttons with two holes or four holes. If attached, it c...
	YZH固定式碎石机械臂系统	卖方: 山东伊润基础工程有限公司	对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。...
	铸造锡基轴承合金	卖方: 河南桦创金属材料贸易有限公司	铸造锡基轴承合金 铸造轴承合金分为锡基、铅基轴承合金。虽然选用于滑动轴承轴瓦（轴套）的轴承材料有粉末冶金、非金属材料和金属材料等，但工业中常选用的还是非铁金属的铸造轴承合金，习惯称为铸造轴承合金...