coating gun drill
Coated tool has characteristics as high surface hardness,good abrasion performance, stable chemical properties,small friction factor and lower thermal conductivity,etc.The cutting performance is 30% higher than non-coated tool.Promote grade 0.5-1 of processing accurancy. Prolong the gun drill's service life and lower 20%-50%of tool's consumption cost.The normal coating contains TiN,TiAn titanium based coating and AICrN chromium based coating,etc.
Other supplier products
|
|
Four-axis Gun drilling Machine Tool |
Overview:
Processing Method: outside chip removing; gun drill
Hole Diameter(mm): Φ10~Φ20
Hole Depth(mm): 500
NC System: GSK980TDC
Drill Pi... |
|
|
Four-axis Gun drilling Machine Tool |
Overview:
Processing Method: outside chip removing; gun drill
Hole Diameter(mm): Φ3~Φ15
Hole Depth(mm): 500; 1000; 1500 (Draw Ratio≤100)
NC ... |
|
|
ZK2130C/1500 Single Axis Gun Drilling Machine Tool |
Overview:
Processing Method: outside chip removing; gun drill
Hole Diameter(mm): Φ5~Φ30
Hole Depth(mm): 1500
Bench Traverse Distance(... |
|
|
coating gun drill |
Coated tool has characteristics as high surface hardness,good abrasion performance, stable chemical properties,small friction factor and lower ther... |
|
|
Dual-axis Gun drilling Machine Tool |
Overview:
Processing Method: outside chip removing; gun drill
Hole Diameter(mm): Φ1.5~Φ8
Hole Depth(mm): 500 (Draw Ratio≤100)
NC Sys... |
供应产品
Same products
