Four-axis Gun drilling Machine Tool

Overview:

Processing Method:  outside chip removing; gun drill

Hole Diameter(mm):  Φ10~Φ20

Hole Depth(mm):  500

NC System:  GSK980TDC

Drill Pipe:  frequency control; simultaneously rotating and feeding

Workpiece:  fixed, non-rotation

Guide Sleeve:  axial restraint

Workpiece Clamping: Pneumatic fasten, drilling for workpieces at one time. The drilling quality can meet the requirement of honing.

Parameter:

Processing Ability:

1. Number of Spindle(pcs):  4
2. Hole Diameter(mm):  Φ10~Φ20
3. Hole Depth(mm):  500
4. Area of Bench (mm2):  600X800

Processing Speed:

1. Max Rotation Speed of Drill Pipe’s Spindle (r/min):  2500
2. Workpiece Rotation Speed(r/min):  0 (workpiece fixed)
3. Feeding Speed Range(mm/min):  ≤1500
4. Forward Speed(mm/min):  ≤2000

Processing Accuracy:

1. Hole Skewness:  ≤1.0/1000 (draw ratio≤100)
2. Dimensional Accuracy of Drill Pipe:  IT8
3. Hole Rugosity:  Ra0.8~Ra1.6

Power of Machine

1. Drill Pipe Motor Power(kw):  2X5.5
2. Oil Pump Power(kw):  2X7.5
3. Feeding Power(kw):  2.3
4. Power of Oil-temp Cooling Machine(kw):  4.05

Hydraulic System

1. Max Volume of Flow(L/min):  4X50
2. Max Pressure(Mp):  8
3. Filtering Accuracy(um):  20
4. Oil Storage Capacity(L):  1360

Basic Dimension & Weight

1. Dimension (mm):  4200*3000*1800(L*W*H)
2. Height between Drill Pipe Centre and Ground(mm):  1070
3. Height between Drill Pipe Centre and Guide(mm): 297.0
4. Distance between Axles(mm):  140
5. Weight of Main Engine(kg):  5000

Other supplier products

	coating gun drill	Coated tool has characteristics as high surface hardness,good abrasion performance, stable chemical properties,small friction factor and lower ther...
	Four-axis Gun drilling Machine Tool	Overview: Processing Method:  outside chip removing; gun drill Hole Diameter(mm):  Φ3~Φ15 Hole Depth(mm):  500; 1000; 1500 (Draw Ratio≤100) NC ...
	Dual-axis Gun drilling Machine Tool	Overview: Processing Method: outside chip removing; gun drill Hole Diameter(mm): Φ1.5~Φ8 Hole Depth(mm): 500 (Draw Ratio≤100) NC Sys...
	ZK2130C/1500 Single Axis Gun Drilling Machine Tool	Overview: Processing Method: outside chip removing; gun drill Hole Diameter(mm): Φ5~Φ30 Hole Depth(mm): 1500 Bench Traverse Distance(...
	Four-axis Gun drilling Machine Tool	Overview: Processing Method:  outside chip removing; gun drill Hole Diameter(mm):  Φ10~Φ20 Hole Depth(mm):  500 NC System:  GSK980TDC Drill Pi...

供应产品

Same products

	SHJ Series Twin Screw Extruder	卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd.	The SHJ Series Twin Screw Extruder() represents a remarkable evolutionary step in the field of ex...
	Underwater Pelletizer	卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd.	The Underwater Pelletizer(), a technological marvel in the polymer processing sector, has redefin...
	Button sewing machine JM-373	卖方: Zhejiang Huaqi Information Technology Co., LTD	FeaturesIt is mainly used for sewing flat buttons with two holes or four holes. If attached, it c...
	YZH固定式碎石机械臂系统	卖方: 山东伊润基础工程有限公司	对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。...
	铸造锡基轴承合金	卖方: 河南桦创金属材料贸易有限公司	铸造锡基轴承合金 铸造轴承合金分为锡基、铅基轴承合金。虽然选用于滑动轴承轴瓦（轴套）的轴承材料有粉末冶金、非金属材料和金属材料等，但工业中常选用的还是非铁金属的铸造轴承合金，习惯称为铸造轴承合金...