Rod Tube Rotary Eddy Current Flaw Detector ET 15/40/65/90
Rod Tube Rotary Eddy Current Flaw Detector ET 15406590 Brief
Rod Tube Rotary Eddy Current Flaw Detector ET 15406590 Performance
Testing Standard：GB/T 11260-2008 round steel eddy current testing method, GB/T 7735-2004 steel tube eddy
Current testing method
Longitudinal artificial injury:0.10（depth）×0.10（width）×20mm（length）
Tube end conditions:
1) deburring at both ends, cross-sectional deformation equal to less than the diameter tolerance
2) Straightness tolerance: tangential direction up to 1.5mm/m and not exceeding the total length of the workpiece
3) Diameter tolerance and ovality: reference DIN standard
Rotating flaw detection system technical performance index
(1)The non destructive testing machine can accurately, reliably and stably record, alarm and mark the defects of the finished steel pipe.
(2)Detection speed:<60m/min
(3)Detection of end -end tail dead zone:
50mm signal to noise ratio: ≥ 10dB
Sample miss rate: 0%
Sample stick false positive rate: ≤2%
Stability: ≤1dB after 2 hours
Marking accuracy: ±30mm
Poor circumferential sensitivity: ≤1dB
(4)100% coverage detection, the instrument sets the upper and lower boundaries, exceeding or lower than the automatic alarm record;
(5)Flaw detection machine operation mode: fully automatic, complete electronic control system, portable eddy current tester, auxiliary control.
The high-speed rotation detection system has the following important features:
l Precision positioning and drive mechanism technology in tube rod inspection;
l Adopting the rotation of the probe and straight forward of the tube rod, the speed is fast, the noise is small, reliable, and the sensitivity is high;
l Multi-channel noise suppression technology;
l Detecting steel rods of different diameters without changing the probe, can continuously and accurately adjust the gap between the steel rod and the eddy current probe;
l The signal adopts high-speed DSP signal processing mode, and each channel signal is processed independently, and the transmitted signal-to-noise ratio is high;
l Wireless transmission technology, no sparks:
l Has a high service life and a small longitude detection blind zone;
l Do not replace the probe rotation detection technology;
l The equipment can operate stably all year-round.
We are one of the leading non destructive testing equipment manufacturers, RFQ today.
在线联系供应商
Other supplier products
 |
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator | Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ... |
 |
Portable Magnetic Flux Leakage Testing Equipment | MFLequipmentrefers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects on the surface... |
 |
MFL101 Tank Floor MFL Scanner | Technical Characteristics ofMFL101 Tank Floor MFL Scanner Unique full modular structure, from the main body of the computer mechanism the handle o... |
 |
Eddy Current Testing Equipment | Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so Detection speed: 6-20 m / min Acceptance criteria: American Petroleum Institute ... |
 |
GTET-02 Cylinder Liner Eddy Current Testing Machine | We have eddy current machine for sale! GTET-02 Cylinder Liner Eddy Current Testing Machine Introduction The rate of missed standard defect is 0... |
Same products
 |
RAW900 高精度水分活度仪 | 卖方: 青岛瑞迪仪器有限公司 | 1.产品概述： 本仪器是一款便携式的高精度水分活度仪，可以测量固体（粉末状、颗粒状、块状）、液体及糊状样品的水活度。主要用于反应平衡状态下的微生物能利用的或者能参与化学反应的有效水分、产品稳定性... |
 |
Digital Rail Head Wear Gauge | 卖方: 武汉联科瑞际轨道设备有限公司 | Rail wear gauge（rail head loss gauge also call it rail profile gauge）is mainly used to measure th... |
 |
SF6 Gas Density Monitor | 卖方: Lanso Instruments LLC. | As one of the professional gas pressure gauge manufacturers, Lanso is committed to offering SF6 g... |
 |
Pressure Transmitter | 卖方: Lanso Instruments LLC. | Lanso different pressure transmitterfeature compact structure and high accuracy, and can output s... |
 |
Pressure Measurement Gauge | 卖方: Lanso Instruments LLC. | Lanso, as a professional oil pressure gauge manufacturers& supplier, keeps on providing our c... |
