Rod Tube Rotary Eddy Current Flaw Detector ET 15/40/65/90
Rod Tube Rotary Eddy Current Flaw Detector ET 15406590 Brief
Rod Tube Rotary Eddy Current Flaw Detector ET 15406590 Performance
Testing Standard:GB/T 11260-2008 round steel eddy current testing method, GB/T 7735-2004 steel tube eddy
Current testing method
Longitudinal artificial injury:0.10(depth)×0.10(width)×20mm(length)
Tube end conditions:
1) deburring at both ends, cross-sectional deformation equal to less than the diameter tolerance
2) Straightness tolerance: tangential direction up to 1.5mm/m and not exceeding the total length of the workpiece
3) Diameter tolerance and ovality: reference DIN standard
Rotating flaw detection system technical performance index
(1)The non destructive testing machine can accurately, reliably and stably record, alarm and mark the defects of the finished steel pipe.
(2)Detection speed:<60m/min
(3)Detection of end -end tail dead zone:
50mm signal to noise ratio: ≥ 10dB
Sample miss rate: 0%
Sample stick false positive rate: ≤2%
Stability: ≤1dB after 2 hours
Marking accuracy: ±30mm
Poor circumferential sensitivity: ≤1dB
(4)100% coverage detection, the instrument sets the upper and lower boundaries, exceeding or lower than the automatic alarm record;
(5)Flaw detection machine operation mode: fully automatic, complete electronic control system, portable eddy current tester, auxiliary control.
The high-speed rotation detection system has the following important features:
l Precision positioning and drive mechanism technology in tube rod inspection;
l Adopting the rotation of the probe and straight forward of the tube rod, the speed is fast, the noise is small, reliable, and the sensitivity is high;
l Multi-channel noise suppression technology;
l Detecting steel rods of different diameters without changing the probe, can continuously and accurately adjust the gap between the steel rod and the eddy current probe;
l The signal adopts high-speed DSP signal processing mode, and each channel signal is processed independently, and the transmitted signal-to-noise ratio is high;
l Wireless transmission technology, no sparks:
l Has a high service life and a small longitude detection blind zone;
l Do not replace the probe rotation detection technology;
l The equipment can operate stably all year-round.
We are one of the leading non destructive testing equipment manufacturers, RFQ today.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Bolt Eddy Current Sorter BKNFX-11 | Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external... | |
Eddy Current Testing Equipment | Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leakage testingis a magnetic method ... | |
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02 | During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all d... | |
Application of Ndt Inspection Equipment | Application of Ndt Inspection Equipment Ndt inspection equipmentis widely used in industry, such as nuclear industry, weapon manufacturing, machin... | |
Оборудование для вихретокового контроля | ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ... |
Похожие товары
FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter | Продавец: Phonefix | FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol... | |
WF-EDU-02 Motor & Propeller Test Kit | Продавец: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... | |
WF-EDU-01 Motor and Propeller Test Kit | Продавец: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... | |
WF-EN-50 Engine Test Bench | Продавец: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... | |
WF-EN-15 Engine Test Bench | Продавец: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |